help with changeing WOT down shift pionts

[restless@westnet.com.au]

thanks darcy i have just done that so will try it tomorrow

[Tre-Cool]

you'll probably find your tcm speedo calculation is out to shit. I used to have a similar problem like you, where the speed I was putting in was about 10kph out.

I used the speedo calculator in efilive and it works fine now.

[restless@westnet.com.au]

hi Dave
that could be so ?
as i have set up the part shifts 4>3 from 75% to 100% at 85 kmh and the WOT shift the same NOW (dident do that the first time ) leaving all the other # as per the stock setting and set the WOT RPM up shifts
at 5800rpm and it is doing what i want for the moment 1st 2nd 3rd up shifts at 5800 rpm and ,downshifts to forth only, above 88 kmh and under that speed will go to 3rd so im happy with that for the moment il have a play with second as it is set a bit close to third
thanks for your help Dave and Darcy cheers Bob

[restless@westnet.com.au]

you'll probably find your tcm speedo calculation is out to shit. I used to have a similar problem like you, where the speed I was putting in was about 10kph out.

I used the speedo calculator in efilive and it works fine now.

could you give me a page shot of the speedo calculator thanks