I contemplating installing a set of Jenvey LS1 individual throttle bodies on an LS1.
What I'm not 100% sure of is that I will be able to successfully tune them on an LS1B 512K PCM running COS5. I know the COS5 has the TPS VE table (A0007) but I've not read any posts on the forum which covers a pure Alpha-N install. Most have been on using A0007 just to help with big cams but still retaining a single throttle body.
So for example how do I populate the table A0007 to start with? I'll have the Main VE table (B0101) populated from my current setup but will that be even remotely able to run the engine to log data. I guess I can populate A0007 as much as I can with my current setup and that may get me up and running with some (serious!) massaging.
If anyone has any input on this and especially if there's anything that would be a show stopper using the PCM I would appreciate your comments.
On the positive the car is not daily driven so I don't mind taking some time to get it right and I can use my friends rolling road to populate the harder parts of the calibration.