Results 1 to 4 of 4

Thread: Issue while changing the Options.txt

  1. #1
    Member
    Join Date
    Mar 2008
    Posts
    60

    Default Issue while changing the Options.txt

    I've had an intermediate problem while changing my PIDs. After doing so sometimes I'm unable to select PIDs or log. If I hit enter to select PIDs ETC the screen will flash but it won't do anything. It doesn't freeze up it just doesn't do anything other then a quick blank screen flashing at me. I was only doing partial options.txt flashes at first then doing a full flash made it work. Then later on even after doing only full flashes it would act up too. Any ideas? I hope my V2 isn't crapping out.

    Thanks

    I have the newest updates.
    06 GMC 2500 CCSB SLT LBZ 4X4

    These views expressed on this post are not my own, but rather randomly generated computer gibberish, and in no way should be used to judge the author's IQ or mental health.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    On V8 S&T BBx page is the bargraph across the bottom red...?

    Post your Options.txt file here.

  3. #3
    Member
    Join Date
    Mar 2008
    Posts
    60

    Default

    I'm working out of town and don't have access to my V2,but here is my option.txt. I didn't notice anything being out of place like a red bar graph.
    Attached Files Attached Files
    06 GMC 2500 CCSB SLT LBZ 4X4

    These views expressed on this post are not my own, but rather randomly generated computer gibberish, and in no way should be used to judge the author's IQ or mental health.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Which V2 firmware version do you have in your V2...?

Similar Threads

  1. Changing Options Like Body Control Module Stuff
    By ZigBlazer in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: August 19th, 2011, 11:40 PM
  2. Two issues: Options.txt and can't detect pcm
    By skills4lou in forum FlashScan V2
    Replies: 8
    Last Post: March 14th, 2011, 02:13 PM
  3. options.txt file
    By chevydieselsmoker in forum FlashScan V2 BB Logging
    Replies: 5
    Last Post: January 9th, 2009, 01:57 PM
  4. New Options.txt
    By Cougar281 in forum FlashScan V2
    Replies: 15
    Last Post: October 22nd, 2008, 06:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •