Page 8 of 8 FirstFirst ... 678
Results 71 to 76 of 76

Thread: Cal links.txt

  1. #71
    Senior Member
    Join Date
    Feb 2014
    Posts
    186

    Default

    iI found a weird problem which is two fold , first all software and pids for scanner are in imperial , but trying t do ve I have to switch map to metric for it to work and I tried this on several computers . second i have one computer that is correctly licensed for RR and efi and it stays in demo and the splitter doesn't work correctly scanner drops out about every two minutes , and im curious what else besides ve and or boost tables I can run and correct with RR , Joe we need a write up , a complete one I know Im new but I will help get it started ,maybe we can pull all of the good info of the threads and put those together and finish it , It would free you and others up alot to help with other issues
    Last edited by SW1911; May 25th, 2014 at 12:42 AM.

  2. #72
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    setting units to Metric in scantool:
    - goto PIDs tab,
    - click twice on column heading "Units" (sorts the pid list on that column),
    - scroll down until you see a group of pids with units "kPa,PSI",
    - highlight that group of pids (click on the first one, hold SHIFT, click on last one, release SHIFT),
    - on the highlighted pids do rightclick->Metric (the Default column will now say Metric.

    setting units to Metric in the scantool maps:
    - choose a map (click the map's letter tab),
    - goto the map properties,
    - on each of the Data, Row and Column tabs select the Metric variant of the pid of interest,
    - remember to checkmark "Show Units" on each tab,
    - remember to save the map.

  3. #73
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    On PC where EFILive V7 software says Demo mode, go Help->Register EFILive copy the blue card details exactly (the date field is non-US style)...

    also enter your RR serial number;

    i.e. see attached:


    Click image for larger version. 

Name:	EFILive License.png 
Views:	235 
Size:	66.3 KB 
ID:	16947


    Click Ok.

    And then copy the file \My Documents\EFILive\V7.5\User Configuration\License.txt to all your PC's.

  4. #74
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Are you using the old USB driver...?

    Start->All Programs->EFILive->V8->EFILive USB Manager, and install 2.02.04.

  5. #75
    Senior Member
    Join Date
    Feb 2014
    Posts
    186

    Default

    so I should set the scan tool and the tune tool to all metric ? and yes the driver is updated , but why when im set to imperial everywhere do iz need to set map to metric ? its boggling my mind

  6. #76
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    It will be easiest to set everything to Metric.

    In the map properties, an available pid will have two variants: Metric (e.g. SAE.MAP.kPa) and Imperial (SAE.MAP.psi)... choose the Metric variant.

Page 8 of 8 FirstFirst ... 678

Similar Threads

  1. Collecting links to scattered material...
    By joecar in forum Tutorials
    Replies: 52
    Last Post: March 31st, 2021, 10:39 AM
  2. sae_generic.txt
    By critter in forum Petrol / Gas
    Replies: 4
    Last Post: November 5th, 2012, 01:24 AM
  3. New Options.txt
    By Cougar281 in forum FlashScan V2
    Replies: 15
    Last Post: October 22nd, 2008, 06:52 AM
  4. Links to software suggestions...
    By joecar in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: May 22nd, 2006, 01:52 AM
  5. Links to widebands that will work with Flashscan/EFIL please
    By DebianDog in forum General (Petrol, Gas, Ethanol)
    Replies: 8
    Last Post: February 17th, 2004, 03:22 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •