New to forum -deciding to buy

[SW1911]

ok so im plugged in and my fuel pump only comes on for a milisecond , crank no start , i set the timer to 4 seconds and still have the same issue arrrrrgh

[joecar]

thanks guys , but check the arrow out on my injector timing , you will notice it looks nothing at all like efi , im just wondering if hpt has the time set as default with no ect , just dont need to get jammed up , today will be my go at the Road Runner

Thanks
Jim

Hi Jim, it seems EFILive does not provide the Injection Timing Boundary parameter.

[joecar]

ok so im plugged in and my fuel pump only comes on for a milisecond , crank no start , i set the timer to 4 seconds and still have the same issue arrrrrgh

Set the timer back to stock.

( which parameter id is the timer...? )

[SW1911]

im kool , joe got everything up and working kinda kool , just no changes that i know of are being made and do you have to be on the table you want to emulate ?,,Joe i hit the flash button by accident thats why it wouldnt start doh

edit also I didnt download my tune to the tool or set a filter in RR so were off today to see what happens , its kinda kool that efi being backwards to me I built a pretty decent file truck runs good

[SW1911]

now rr is active but no changes are being made , im missing something ?not sure what

[joecar]

Post screenshots.

[joecar]

im kool , joe got everything up and working kinda kool , just no changes that i know of are being made and do you have to be on the table you want to emulate ?,,Joe i hit the flash button by accident thats why it wouldnt start doh

edit also I didnt download my tune to the tool or set a filter in RR so were off today to see what happens , its kinda kool that efi being backwards to me I built a pretty decent file truck runs good

Flash button is only applicable if the RR has actual flash (which it mpst likely does not).

[joecar]

now rr is active but no changes are being made , im missing something ?not sure what

You should be able to make changes and see them take effect in real time...

for example, goto desired idle tables and alter idle speed.

[SW1911]

[SW1911]

ok so now i have a new problem , new laptop 2 -2.0 usb and one 3.0 rr was dropping out so i switched it to the 3.0 now my scanner drops out and i get a windows error usb device not recognized ????? any help on this one