BBL Aborting Prematurely Aborting--*.EFI and *.EFX files attached. Please analyze

[joecar]

V2 internal memory should be large enough for some logging (~20 minutes if I remember right).

[Blacky]

Also, wondering why I cant use the SCAN tool to read from the V2 vs using the explorer to transfer the log file. I noticed there is a menu option to do this, but its disabled.

The V7.5 scan tool can only read data logs from FlashScan V1 devices. It will never be able to read scan tool data directly from the V2 device.

EFILive V8 will eventually be able to read log files directly from the FlashScan V2 device.

Regards
Paul

[joecar]

...

Also, wondering why I cant use the SCAN tool to read from the V2 vs using the explorer to transfer the log file. I noticed there is a menu option to do this, but its disabled.

You can use EFILive Explorer to move the log file from V2 to PC, and then you can view it using V7 scantool.

[TFZ_Z06]

V2 internal memory should be large enough for some logging (~20 minutes if I remember right).

EFI Explorer indicates it is ~4MB. My config is approximately 0.5MB, leaving 3MB+ for logging. Works for me.
Plenty of room for 1/4 mile testing.

The V7.5 scan tool can only read data logs from FlashScan V1 devices. It will never be able to read scan tool data directly from the V2 device.

EFILive V8 will eventually be able to read log files directly from the FlashScan V2 device.

Regards
Paul

Drag and drop works just fine. Not sure what to make of V8 yet. Sure it will be good though.