Results 1 to 10 of 11

Thread: FlashScan being recognized as "Scan Only" when uploading tune

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Feb 2006
    Posts
    49

    Default FlashScan being recognized as "Scan Only" when uploading tune

    Hello All,

    I have purchased a Flashscan V1.2. It came with some registration information that did not match the serial number of the flashscan device that I received. In addition, it is an "Autotap" registration certification printed on a piece of paper dated June 22 2004. I was told that the registration key on the paper was the correct one, but I have been unable to get my EFILive software to register. When I view the Flashscan V1 PCM license information it says that it is a Personal Scan&Tune. The Firmware is the most current one dated 18JAN2005, and shows that it has completed 20 reflashes.

    When I go to upload a modified tune to my car (2002 Camaro LS1B), it says that my cable is "Scan Only" and it won't upload the tune. So, just to test, i used my old registration information from my prior flashscan and it took the registration (no longer in demo mode without the flashscan plugged in). I tested it again, still the same result. What gives? Is it because I have been unable to get my EFILive software registered with the correct serial number to the device I'm trying to use? Or is there something wrong with my Flashscan v1.2? I also checked the driver version and I'm using the most current one 2.08.28, and using the most current EFILive software on Windows 7.

    Any help would be greatly appreciated.

    Haans249

  2. #2
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    Log a help desk issue as described here: http://support.efilive.com/kb_articl...7778-QEKN-0400
    Include the *.blx trace file from the failed flash attempt.

    Regards
    Paul
    Before asking for help, please read this.

  3. #3
    Junior Member
    Join Date
    Feb 2006
    Posts
    49

    Default

    Quote Originally Posted by Blacky View Post
    Log a help desk issue as described here: http://support.efilive.com/kb_articl...7778-QEKN-0400
    Include the *.blx trace file from the failed flash attempt.

    Regards
    Paul
    Help Desk question opened. I'll let everyone know the result. Attached are pictures of the issue I'm having just for everyone's reference.

    Thanks.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Cable Information.jpg 
Views:	118 
Size:	81.3 KB 
ID:	16481   Click image for larger version. 

Name:	Tune error.jpg 
Views:	111 
Size:	249.2 KB 
ID:	16480  

  4. #4
    Junior Member
    Join Date
    Jul 2015
    Posts
    26

    Default

    Did you ever get this resolved? I am having the exact same issue and have tried reinstalling, rolling back to an earlier version of 7.5, then a v6, usb drivers, restarting computer, different usb cable etc etc to no avail

  5. #5
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,752

    Default

    Quote Originally Posted by estringer View Post
    Did you ever get this resolved? I am having the exact same issue and have tried reinstalling, rolling back to an earlier version of 7.5, then a v6, usb drivers, restarting computer, different usb cable etc etc to no avail
    Does your blue card info match your V1's serial number...?

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    27,752

    Default

    Quote Originally Posted by estringer View Post
    Did you ever get this resolved? I am having the exact same issue and have tried reinstalling, rolling back to an earlier version of 7.5, then a v6, usb drivers, restarting computer, different usb cable etc etc to no avail
    Does your blue card info match your V1's serial number...?

    Do Help->About and post a screenshot.

  7. #7
    Junior Member
    Join Date
    Jul 2015
    Posts
    26

    Default

    Quote Originally Posted by joecar View Post
    Does your blue card info match your V1's serial number...?

    Do Help->About and post a screenshot.
    Soooooo... Problem is i changed laptops over a year ago and had never re entered registration number. somehow i figured authentication code was the same. Emailed support with my serial number and am waiting for a response. Posted for future reference for anyone

  8. #8
    New Member
    Join Date
    Jul 2015
    Posts
    1

    Default

    Figured I'd chime in here, I'm estringer's roommate, trying to help him diagnose this problem. Helpdesk has been no help offering nothing but generic answers and still hasn't replied to our correspondence last week, but we have traced the problem to something in the builds. V7.5 build 126 which is not available but he happened to have on an old harddrive had no problem flashing his car. It should be noted that 126 still supports .tun files.

    I'll remind him of this thread and have him email the *.blx file anyways, because I would like to see him be able to use a more current version. Your responses are appreciated Blacky.

  9. #9
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    The problem is not with anything at your end.

    The EFILive V7 software was changed a while back to only allow flashing from V1 devices that are licensed as Commercial Scan and Tune. Personal Scan and Tune devices no longer support flashing. Obviously our intention was not to remove functionality from V1 Personal devices. A free upgrade to Commercial Scan and Tune is available for all V1 Personal Scan and Tune owners. To obtain the upgrade please send your FlashScan V1 serial number to me at paul@efilive.com and I will send you back the upgrade code.

    Sorry for the delay and the confusion, I had forgotten that we had made that change to the software a while back.

    Regards
    Paul
    Before asking for help, please read this.

Similar Threads

  1. Replies: 4
    Last Post: September 3rd, 2013, 07:18 AM
  2. Replies: 3
    Last Post: March 6th, 2011, 01:12 PM
  3. Replies: 14
    Last Post: June 20th, 2009, 03:48 AM
  4. EFILive "Classic"/"Legacy"/"Historic"?
    By emarkay in forum FlashScan V2
    Replies: 6
    Last Post: November 2nd, 2008, 01:48 AM
  5. "PCM is in an Unkown State" & "Reflash Failed"
    By foxySS in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: September 8th, 2006, 11:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •