Results 1 to 4 of 4

Thread: LC1 serial cable logging??

  1. #1
    Junior Member
    Join Date
    Jul 2013
    Posts
    43

    Default LC1 serial cable logging??

    Hey guys, looking for some information about using the serial cable for logging between my LC1 and my V2. I did a search but didnt find any clear answers, thanks!

  2. #2
    Lifetime Member mr.prick's Avatar
    Join Date
    Nov 2006
    Posts
    3,195
    512k RoadRunner Firmware 12.14R
    FlashScan V2 Bootblock V2.07.04 Firmware V2.07.22 EFILive V7.5.7 (Build 191) V8.2.1 (Build 181)
    LC-1 WBO2

    _________________________________________________

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

  4. #4
    Lifetime Member EagleMark's Avatar
    Join Date
    Dec 2010
    Posts
    466

    Default

    I'd go with the Null Modem so it's an easy unplug and plug back into WB to program the LC1.

    I also had issues with the TAQ cable as it was hard to insert all the way... then stretched the connection leaving me with in accurate WB readings.

Similar Threads

  1. Setting up my LC1 using a TAQ Cable
    By blsnelling in forum Gen III V8 Specific
    Replies: 12
    Last Post: October 28th, 2010, 09:02 AM
  2. Question on LC1 with V2 and TA cable...
    By nitrorocket in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: December 21st, 2009, 03:54 PM
  3. LC1 serial to V2
    By nonnieselman in forum FlashScan V2
    Replies: 6
    Last Post: November 12th, 2008, 01:58 PM
  4. Need Help w/LC1 Serial Logging
    By TFZ_Z06 in forum FlashScan V2 BB Logging
    Replies: 19
    Last Post: August 4th, 2008, 02:35 PM
  5. LC1 Serial Logging
    By oztracktuning in forum General
    Replies: 8
    Last Post: November 8th, 2005, 05:45 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •