Results 1 to 3 of 3

Thread: No injector balance rate reading when scanning

  1. #1
    New Member
    Join Date
    Apr 2009
    Posts
    1

    Default No injector balance rate reading when scanning

    I just bought an 03 duramax with a zf6 manual Trans. When I connect to scan there are pid's for the balance rates but its not giving me values. Tried the V2 on my other 03' with allison and it displayed them just fine. Also up to date on firmware and all recent downloads.. Any help would be appreciated.

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Moved into Diesel subsection for better traction.

  3. #3
    New Member Heartbeat Hauler's Avatar
    Join Date
    Apr 2006
    Posts
    9

    Default

    I sort of had this issue although my problem was I didn't have the balance rates to choose. I tried a lot of different things and nothing helped. Finally one of the guys on this forum suggested that I uninstall the software and reinstall it. That worked for me.

    I know it's a pain in the backside, but if all else fails give it a shot.
    Good luck.
    2001 Dmax/Alli 3500 LS 4x4, Banks 4" Exhaust & Big Head WasteGate, Bilsteins, VR Straps, Racor 660 Secondary (Pre-OEM) fuel filter kit
    2004 Suburban 2500 LT 6.0
    1996 Chevy Caprice LT1

    3500 Dually Club - Member #187

Similar Threads

  1. 02 LB7 balance rate PID's gone from list?
    By haulinit in forum Duramax LB7
    Replies: 3
    Last Post: June 11th, 2012, 11:37 AM
  2. LB7 Balance Rates all reading 0
    By Mitco39 in forum Duramax LB7
    Replies: 1
    Last Post: May 15th, 2012, 09:08 AM
  3. No Balance Rate PIDs?
    By Heartbeat Hauler in forum Diesel
    Replies: 23
    Last Post: April 15th, 2012, 05:34 AM
  4. LB7 Fuel Injector balance rates reading 0
    By StuntHeavy in forum Duramax LB7
    Replies: 1
    Last Post: July 7th, 2010, 01:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •