In the text box (the log of what happens when you flash), can you copy all of it (place cursor in box, do CTRL-A CTRL-C) and paste it here (CTRL-V) in a reply to this thread...
( I want to see the flash portion of the log )
In the text box (the log of what happens when you flash), can you copy all of it (place cursor in box, do CTRL-A CTRL-C) and paste it here (CTRL-V) in a reply to this thread...
( I want to see the flash portion of the log )
If you have any aftermarket radio, alarm system, pull the fuses for them.
2005 1500 HD , Custom OS3 SD tune .
2006 Trailblazer
Dinosaurs and Plants gave their lives so that we may drive , long live fossil fuel .
It is what Taz explained in post #11.
http://forum.efilive.com/showthread....l=1#post195148
Regards
Paul
Before asking for help, please read this.
Ok, cool, thanks Paul.
cos is now loaded and cal is flash in. read the file and the cos is there. adjusted what I needed and now ready to tune.
Be sure to fix B3647 and any out-of-range A00xx cells.
hey joe, i was looking and reading the user note in A0011 and it reads that this is used on (j2,pin56) shouldn't it be C2,pin 56?
I fixed all oor cells along with B3647, hopefully when it warms up a little and stops raining i can start tuning this vega. A 6.0 with a turbo should move it ok..
I thought J2 is C2...
If you look at the the PCM ... there is "J1 BLUE" cast into the metal body of the PCM, near the BLUE (C1 / J1 / X1) connector. The terms are used interchangeably.
Posting Permissions
Reply With Quote