Hi,

I thought I had it all right, until I saw most of my Auto_VE map was at of well above 100%

I have a 03 Z06 with a Callaway Honker, LT headers, and a LC2 Wideband. Lots of track days, so I want to make sure my A/F is safe. Seems to run around 13.0 during WOT even with commanded ARF at 12.0

I THINK I setup all the PIDs/Maps and calc_pids.txt correctly. However, as mentioned above my Auto_VE is off.

One thing which may be the issue, is how to get the values from my LC2 AFR into the equations? The tutorial show EXT.WO2AFR1 as the PID, but that is 0 in my data collection. I use EXT.AD1 and CALC.AF_LC11 to get my AFR values....

Please help me figure out where I went wrong.

https://www.dropbox.com/s/xhd3bdx891z7mcb/vemap.jpg
https://www.dropbox.com/s/s54r6l11008adf9/calc_pids.txt
https://www.dropbox.com/s/veqxykq4krkg80t/Data.jpg

Thank you!!!

Tom