Results 1 to 3 of 3

Thread: Tps?

  1. #1
    New Member
    Join Date
    Feb 2014
    Posts
    8

    Default Tps?

    Ok guys. So I data logged a run at the track. And after reviewing my log. I noticed I'm only getting a max of 88% tps. And my injector duty cycle never crosses over 88%. Also at idle tps is reading 20%. Is there a way to recalibrate the tps or is this normal? Also I'm guessing when it goes to 100%. I outta notice a performance change? Thx in advance guys. Joe

  2. #2
    Lifetime Member
    Join Date
    Aug 2010
    Posts
    1,934

    Default

    This has been discussed since 2006 ... don't log TPS on a Gen IV.

    For the APP (gas pedal) position log - GM.APP

    For the TB position log - GM.ETCTP

  3. #3
    New Member
    Join Date
    Feb 2014
    Posts
    8

    Default

    Thank you for the reply.

Similar Threads

  1. SAE TPS and actual TPS opening %?
    By O1Z06 in forum Petrol / Gas
    Replies: 6
    Last Post: February 2nd, 2011, 04:28 AM
  2. Alpha N (TPS Load) help... noisy TPS signal?
    By Tomato in forum Gen III V8 Specific
    Replies: 4
    Last Post: July 4th, 2008, 10:22 PM
  3. Tps %
    By Bob's Garage in forum Gen IV V8 Specific
    Replies: 4
    Last Post: June 18th, 2007, 10:35 AM
  4. tps
    By southern in forum Gen III V8 Specific
    Replies: 2
    Last Post: May 10th, 2007, 06:03 AM
  5. VE Multiplier vs. TPS vs. RPM table, with non-linear TPS...
    By SSbaby in forum General (Petrol, Gas, Ethanol)
    Replies: 17
    Last Post: November 7th, 2005, 11:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •