4L60E wont lockup using bidirectional controls

[Antwon]

Hey all!

A little background on the setup:
Built Sonnax 4L60e
Precision Triple disk converter
Efilive V1

Ive got a problem. I cant seem to get my built 4l60e to lock the converter using the bidirectional controls. I can drive it and hit the "TCC Enable Solenoid" button and set the "TCC control solenoid" to 100% and it will lockup.....but it doesnt stay locked. However, Ill lock it in 3rd using the bidirectional controls and it wont downshift which is what its supposed to do, but then I make a pull in 3rd and the car will show about 800-900rpm converter slip speed and the TCC mode stays on "OFF".

It seems like the controls only work sometimes. Is there a problem with my car/cable/efilive? Is there anyway I can FORCE it to hold 3rd gear and lock the converter so I can get a clean pull for tuning?

Thanks in advance,
Anthony

Heres a log:
Log_0021.efi

Heres my map:
DTM FINAL NEW PULSE WIDTH VOLTAGE.tun