Results 1 to 5 of 5

Thread: Cam sensor wiring pinout

  1. #1
    Junior Member
    Join Date
    Feb 2014
    Posts
    17

    Default Cam sensor wiring pinout

    Hi guys,

    I have an 05 model ls2 with the 24x and 1x trigger wheels. Using a cam sensor in the timing case GM part no:12585545. Would anyone know what the pinout should be for this sensor? There is no ABC on it, but it has +,-,O. Guessing O is signal?? Can't seem to find a definite answer.

    Thanks

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Post a pic of the connector on the end of the sensor, and indicate which pins are + - o

    my guess: + = signal (A), - = low reference/return (B), o = 12V reference (C).

  3. #3
    Junior Member
    Join Date
    Feb 2014
    Posts
    17

    Default

    All good thanks. It was as we thought

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Which symbol represents the signal...?

  5. #5
    Junior Member
    Join Date
    Feb 2014
    Posts
    17

    Default

    + is 12v ref, - is ground, O is signal

Similar Threads

  1. Knock sensor wiring
    By 5.7ute in forum Conversions / Aftermarket Parts
    Replies: 17
    Last Post: August 18th, 2014, 07:38 PM
  2. LS1 to LS2 cam sensor wiring help
    By Tre-Cool in forum Gen III V8 Specific
    Replies: 12
    Last Post: July 21st, 2014, 04:59 AM
  3. Wiring map sensor into external output
    By badls1 in forum Gen III V8 Specific
    Replies: 16
    Last Post: June 7th, 2013, 07:28 AM
  4. 0411 Swap, O2 sensor wiring is different
    By nevinsb in forum Gen III V8 Specific
    Replies: 10
    Last Post: September 2nd, 2012, 01:36 AM
  5. Wide band wiring at sensor to loom
    By Picto in forum Petrol / Gas
    Replies: 0
    Last Post: September 28th, 2010, 09:58 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •