Page 1 of 5 123 ... LastLast
Results 1 to 10 of 45

Thread: Can't load PIDS for BB log

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Jul 2005
    Posts
    164

    Default Can't load PIDS for BB log

    Launched old laptop from roof of car. Downloaded V7.5.7 Build 245 on different XP laptop using FSP 1.2 . Overcame the licensing but am unable to load PIDS for BB logging. Help would be much appreciated.



    Click image for larger version. 

Name:	picdoc2.jpg 
Views:	456 
Size:	189.9 KB 
ID:	16769
    Y2K C5, M6, LS6 intake, Kooks LT headers, High flow cats, 216/224 113 LSA, 5.3 Stage II heads. STS twins. COS

  2. #2
    Lifetime Member darcy's Avatar
    Join Date
    Feb 2012
    Posts
    223

    Default

    USe the v8 program to set up a v2 for BBL.

  3. #3
    Senior Member
    Join Date
    Jul 2005
    Posts
    164

    Default

    I use a V1 for BB and ver 7.5 is the latest upgrade. I actually loaded PIDs to black box while connected to PCM. Forgot to mention I use COS 200303. Logs correctly straight to computer but BB logging the same PIDs 60% are showing N/A. Am suspecting a failed cable
    Y2K C5, M6, LS6 intake, Kooks LT headers, High flow cats, 216/224 113 LSA, 5.3 Stage II heads. STS twins. COS

  4. #4
    Lifetime Member darcy's Avatar
    Join Date
    Feb 2012
    Posts
    223

    Default

    Missed that bit, sorry. I didn't realise a v1.2 could do BBL.

    Problem sounds a bit like in this thread: https://forum.efilive.com/showthread...into-flashscan

  5. #5
    Senior Member
    Join Date
    Jul 2005
    Posts
    164

    Default

    Wish it where that simple.
    Y2K C5, M6, LS6 intake, Kooks LT headers, High flow cats, 216/224 113 LSA, 5.3 Stage II heads. STS twins. COS

  6. #6
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Your PIDs tab shows 19 selected pid and 0 selected channels...?

    Try this:

    on the FlashScan Control Panel (for V1) do this:
    - select Fast (10 f/s),
    - set Max Frames Per Log to zero (i.e. unlimited),
    - click Validate;
    - follow the instructions it tells you (it will tell you to connect V1 to vehicle and let it validate, and then to bring it back to PC).

  7. #7
    Senior Member
    Join Date
    Jul 2005
    Posts
    164

    Default

    Followed our instructions up to validate, was warned all log files would be erased, clicked yes to continue and was told Flashcan is now ready for validating pids.No further instructions.
    I thought all colored pids where selected. How do you select channels?
    Y2K C5, M6, LS6 intake, Kooks LT headers, High flow cats, 216/224 113 LSA, 5.3 Stage II heads. STS twins. COS

  8. #8
    Senior Member
    Join Date
    Jul 2005
    Posts
    164

    Default

    It's been four years since I tuned my ride. Fell into a brand new hole here. Flashscan control panel reports 1 total log file plus time/log @ 01:13:38 and total time @ 01:13:38. Looks like its gorged.
    Y2K C5, M6, LS6 intake, Kooks LT headers, High flow cats, 216/224 113 LSA, 5.3 Stage II heads. STS twins. COS

  9. #9
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Ok... (it's been a long time since I did V1 BBL)... I sent Paul an email for further guidance

    ( the channel count should not be showing up as zero )

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Try this: click the Progam Pids button.

Page 1 of 5 123 ... LastLast

Similar Threads

  1. PIDs to log?
    By Mikz86ta in forum General (Petrol, Gas, Ethanol)
    Replies: 22
    Last Post: May 30th, 2013, 01:50 PM
  2. What pids do I need to log?
    By Cool28 in forum Gen III V8 Specific
    Replies: 0
    Last Post: November 22nd, 2011, 01:27 PM
  3. Replies: 2
    Last Post: September 8th, 2011, 10:07 PM
  4. Can't log some airflow PIDs
    By O1Z06 in forum Petrol / Gas
    Replies: 16
    Last Post: February 21st, 2011, 04:03 AM
  5. How do i setup my PIDs to log?
    By RyanU in forum External A/D inputs
    Replies: 9
    Last Post: September 5th, 2008, 09:17 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •