E78 BiDirectional Controls DVT

[rcmn0022]

Is there any chance of getting some bidirectional controls available for the e78 controller.
Using the other controller selections only allows for use of setting a desired idle speed and forcing open/closed loop.

I was hoping for injector disable at the very least.

[GMPX]

If you choose E38 all that should work on the E78 as well, which controller have you been selecting?

[Tre-Cool]

does this also apply to the e83b or entirely different?

[GMPX]

Should apply to that too, GM got pretty good on......wait for it.....standardising! between ECM's as the years have progressed.

[rcmn0022]

Anytime I try to enable the control for the injectors, it says that there was a timeout and it won't allow me to disable individual injectors. It was even picky about enabling closed loop if I hadn't enabled the fuel trim learn first.

The above was tried on the E38 but I also tried all of the ECMs that were L4 or looked very similar to the exterior of my ECM

[GMPX]

Unfortunately we don't have a car with an E78 to test this on anymore, we'll have to ask around to see what others find. But timing out sounds like a communication issue, still E38 should have worked.

[ScarabEpic22]

I can test DVTs on my Sonic if you need someone, shoot me a PM.

[cindy@efilive]

That would be awesome Eric. If you could test, then run trace files as per the Software a build beta requirements and submit those in the beta section Ross and Paul can follow up. Please make sure you upgrade to yesterday's release first.

Cheers
Cindy

[Boost]

Hey, I caught this one just in time! I also have a daily E78 if there is anything I can help with.

[rcmn0022]

I'm also good to help with this as well.