Results 1 to 10 of 22

Thread: 01-07 "4x4 Option" cax

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Lifetime Member
    Join Date
    Aug 2006
    Posts
    412

    Default 01-07 "4x4 Option" cax

    I found an old .cax file for the 4x4 Options. It was created by CC + M. I am assuming M is Mick. I don't know who CC is. Anyway---I take NO credit for
    this. All I did was update it a bit and add this parameter for other years of LS1b PCM Operating Systems.
    These "4x4 Options" .cax files are for the 2001-2007 LS1b PCMs. After these are installed you will find the parameter B9103. These .cax files allow
    you to set the "4x4 Options" to 2wd or 4wd. This may come in handy for retrofit projects. I'm sure I don't have all of the operating systems covered
    for those years but there are a total of 19 operating systems covered in these 7 .cax files. I didn't make any for the 1999 and 2000. I feel it is too
    easy to upgrade those to the better 2002 operating system. Follow the directions in GMPX's sticky about .cax files for where to install them into the
    software. Remember, If you already have .cax files that cover these O/S, you will have to add the contents of these into those folders. If you don't
    already have any .cax files for these O/S, you will have to make duplicate copies of them and name them the number of the O/S that they correspond to.

    zip file updated on 10-20-14

    Jeff
    Attached Files Attached Files
    Last edited by Lextech; October 20th, 2014 at 02:02 PM. Reason: Correct a mistake.
    98 GMC RCSB 2WD, Internally stock 305 w/Twin T-3 junkyard Turbos,4L80e,Ramjet intake,42lb.inj., 0411PCM, COS3,4675LBS w/me in it. Best Time on 5 passes-13.01@110

Similar Threads

  1. 01-07 "Gear Indicator Type" cax
    By Lextech in forum CAX Files
    Replies: 9
    Last Post: December 20th, 2016, 10:58 AM
  2. "File Sys FULL!" followed by "ERROR: $0520"
    By Sushisan in forum AutoCal
    Replies: 2
    Last Post: April 24th, 2012, 06:35 AM
  3. Replies: 3
    Last Post: March 6th, 2011, 02:12 PM
  4. EFILive "Classic"/"Legacy"/"Historic"?
    By emarkay in forum FlashScan V2
    Replies: 6
    Last Post: November 2nd, 2008, 02:48 AM
  5. "PCM is in an Unkown State" & "Reflash Failed"
    By foxySS in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: September 8th, 2006, 12:53 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •