I was hoping somebody might help me out. I have not been able to figure out why I keep loosing mm3 and duration but noticed it seems to be tied to 2800 rpm. I am attaching my csp5 tune file and two logs. CMB_0084 log is starting the pull in overdrive and it downshifts to 3rd unlocked and then locks up. If you watch commanded mm3 and duration drops once rpms hit 2800. The CMB_086 log I start the pull in tow haul locked in 3rd so the rpms dont jump above the 2800 and it seems to fuel much better until I reach that 2800 again?
The tune is csp5 on tune 3. I would appreciate any help or ideas on this!
Thanks!
Doug