All my limiters are disabled, all my limiter tables go to 4200rpm, and all my limiting tables are set at 145mm^3 above 2600, but I still see commanded fuel being pulled after 2600-2900rpm. any other thoughts?
Help with csp5 2800rpm fuel issue?
All my limiters are disabled, all my limiter tables go to 4200rpm, and all my limiting tables are set at 145mm^3 above 2600, but I still see commanded fuel being pulled after 2600-2900rpm. any other thoughts?
If the pcm sees 50psi on the map sensor it thanks there a fault. If fuel pressure stays to low it will pull mm3
EFILive Beta Tester
2006 DODGE RAM 2500 4X4 Industrial Injection R1 100HP Injectors and BAG-O-PARTS, ATS Exhaust Manifold, AFE 67MM Turbo and MANIFOLD
Posting Permissions
Reply With Quote