Page 4 of 4 FirstFirst ... 234
Results 31 to 33 of 33

Thread: Enable Tap UP Tap Down in Engine SWAPs using corvette tcm tune and external switchs

  1. #31
    Lifetime Member
    Join Date
    May 2012
    Posts
    303

    Default

    Quote Originally Posted by rickardss View Post
    400ss - did this work? Were you able to simplify the circuit? I have a floor shifter (caddy / G8) and was hoping to recreate what you have done if it works? Any photos / final wiring diagrams would be a big help.

    Attachment 19347
    yes you can simplify the circuit, yes one step down,(M) mode, 1/4 watt will be ok, try to find the same ohms resistor,, corvette tune and done

  2. #32
    New Member
    Join Date
    Mar 2016
    Posts
    2

    Default

    Thanks 400ss.

    Do you have experience getting manual shift to work on a floor shifter? As in can I shift gears in M mode using a stock G8 / caddy shifter with the 6l80 just by wiring it up (12v, ground and control wire to pin 7 on trans)? Assuming corvette tune again is done.

  3. #33
    Senior Member Naf's Avatar
    Join Date
    Aug 2006
    Posts
    183

    Default

    I know i am diggin up an old thread, but i am curious to know if i use a 2007+ column stock shifter, PN 15860125, with my stand alone harness, would i be able to use the TUTD and power option in my project vehicle?

    I am goin to upgrade the engine, and transmission from the old TBI/4l60e combo to the Gen IV engine w/o VVT / 6L80e transmission.

    I had two issues,

    1, cruise control, ( may have a fix with eficonnection)
    2, TUTD in column shifter for stock like appearance.

    Plz let me know about the TUTD shifter
    American Muscle, European Design, Japanese Tactics

Page 4 of 4 FirstFirst ... 234

Similar Threads

  1. 2012 Vette 6l80 tune in older trans for faster tap up tap down and rev matching
    By RD in SD in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 16
    Last Post: January 24th, 2015, 12:36 PM
  2. TAP Preset
    By L31Sleeper in forum Allison 5 & 6 Speed
    Replies: 7
    Last Post: April 19th, 2011, 03:14 PM
  3. Tap up/down TCC during shifts?
    By ssvolvo in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 3
    Last Post: February 16th, 2011, 10:29 PM
  4. Reset Tap Cells
    By jaydog in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 1
    Last Post: January 23rd, 2009, 07:05 PM
  5. Upgrade from auto tap to v2?
    By poolshark021 in forum Purchase and Shipping
    Replies: 2
    Last Post: May 2nd, 2006, 03:05 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •