Results 1 to 8 of 8

Thread: E92 Driver Demand Vertical Axis Clarification

  1. #1

    Default E92 Driver Demand Vertical Axis Clarification

    The vertical axis in Drivers Demand table {B8802} it is noted as RPM or SPEED. Where is this coming from? If speed can we assume MPH?

    www.redline-motorsports.net

    1-954-703-5560

    2006 ZO6 895/866 with APS TT
    2010 SSRS Camaro HTR-900TT (798/801)
    2011 HTR-850R Camaro
    2012 ZL1 Auto (10.33@135 MPH) Video Here!

  2. #2
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,897

    Default

    Kph
    "All that is needed for the triumph of evil is that good men do nothing..."

  3. #3
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    ALL GM's computers from 2005 or so are coded in metric, so always assume metric, the conversion to imperial is handled by EFILive. However, this is a special case because these numbers are not normal, they are floating point numbers which means what you see is what you get, there is no scaling to MPH, KMH, DegF, DegC etc, it is what it is. The numbers are defined in an axis and that is what EFILive is showing.
    Last edited by GMPX; May 11th, 2014 at 04:25 PM.
    I no longer monitor the forum, please either post your question or create a support ticket.

  4. #4
    Lifetime Member
    Join Date
    Jul 2003
    Posts
    1,897

    Default

    That means we can change that axis? there is an n/v ratio set to 1 so doing that means kph... but one could back calculate rpm this way... newer ECUs use RPM as the axis from factory
    "All that is needed for the triumph of evil is that good men do nothing..."

  5. #5
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    No, you can't change the function used, it is either RPM or KM/H.
    I no longer monitor the forum, please either post your question or create a support ticket.

  6. #6
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default

    Is it safe to bump these tables by % ?

  7. #7
    Lifetime Member HellKnightHicks's Avatar
    Join Date
    Mar 2011
    Posts
    268

    Default

    The Answer is yes. It is Safe. Try to keep the 0 TPS like stock.

  8. #8
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Quote Originally Posted by HellKnightHicks View Post
    The Answer is yes. It is Safe. Try to keep the 0 TPS like stock.
    Thanks for sharing

Similar Threads

  1. Displacement on Demand Lifters
    By NateD4 in forum Lounge
    Replies: 12
    Last Post: January 13th, 2012, 10:49 AM
  2. Displacement on Demand
    By Cougar281 in forum Gen IV V8 Specific
    Replies: 3
    Last Post: February 10th, 2008, 05:14 PM
  3. Need a Down Under Clarification
    By TAQuickness in forum Lounge
    Replies: 23
    Last Post: February 25th, 2006, 06:58 AM
  4. Demand of 7.0
    By 87gmc in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: November 22nd, 2004, 08:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •