Results 1 to 2 of 2

Thread: 3rd Gen conversion

  1. #1
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Default 3rd Gen conversion

    My son is putting an LS1 into a 3rd gen. We needed a PCM and added a VIN to it to maqke the system happy. If we added a VIN for an A4 would it affect the tuning and running of the engine when in fact we have the M6 and not the A4? That's it. SImple question. They can't get the crankshaft to relearn and they're blaming the VIN.


    Elmer
    2014 Corvette Convertible, Torch Red, A6, Z51, 3LT, NPP Exhaust



  2. #2
    Lifetime Member eboggs_jkvl's Avatar
    Join Date
    Apr 2004
    Posts
    757

    Default

    LOL! Update. I went back to the guy that loaned me his VIN for the PCM and he confirmed that it was for an m6. Thus NLP is blowing smoke again and the VIN is not the reason for their difficulties. So, never mind. I have an appropriate VIN for the engine and tranny configuration.

    Thanks anyhow.

    Elmer
    2014 Corvette Convertible, Torch Red, A6, Z51, 3LT, NPP Exhaust



Similar Threads

  1. Please help with LS2 conversion
    By jasonsfbodies in forum Gen IV V8 Specific
    Replies: 21
    Last Post: August 3rd, 2010, 12:42 AM
  2. vz ls1 to l98 conversion
    By shane in forum Gen III V8 Specific
    Replies: 1
    Last Post: November 30th, 2008, 10:41 PM
  3. E-85 Conversion
    By vatman02 in forum General (Petrol, Gas, Ethanol)
    Replies: 13
    Last Post: May 26th, 2008, 01:53 AM
  4. MIL for a LS1 conversion
    By Biggsy in forum Gen III V8 Specific
    Replies: 11
    Last Post: April 7th, 2007, 04:44 PM
  5. 2k2 C.E.T/A LS1 to LS6 conversion
    By zentor in forum Gen III V8 Specific
    Replies: 5
    Last Post: April 2nd, 2007, 12:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •