Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Efi problem, HELP!

  1. #1
    New Member
    Join Date
    May 2014
    Posts
    6

    Default Efi problem, HELP!

    Kind of in a pinch here and need some help. I installed my sinister egr delete kit and flo pro turbo back 5 inch straight pipe. Now this morning i went to install my efi tunes. In the middle of the tuning it says "aborting anti-tune" and then does the count up to 100%. Then it says turn ignition off and counts down from 10. Then it goes back to the main screen, the tune i selected to upload. When i start the truck it runs bogs down goes back to normal idle and continues to do that. Also the check engine light comes on, so i went to scan the dtcs and it gives me an error code. I got my other code reader and scanned it and got4 different codes all egr related. Also it never gave me the option to "license the tuner". What am i missing or doing wrong here? Sorry for the long post. I've been told I have the updated ECM with the Bootloader. I've been told the smarty J67, S67 and raceMe versions will bring it back to stock and get rid of the boot loader so I can then update my efi tunes. Is that correct and are there any other options because I don't have access to a Smarty. If any one in the Chicago/Rockford/southeast wi area has one and is willing to let me borrow it aim willing to pay you.

  2. #2
    Junior Member longcummins's Avatar
    Join Date
    Feb 2013
    Posts
    49

    Default

    What you have been told
    Is correct you will need a smarty to reset the boot logger. Load up the smarty then uninstall it. Then load up
    You efilive tune and all is well.
    467.7 FMW Stainless Diesel

  3. #3
    New Member
    Join Date
    May 2014
    Posts
    6

    Default

    Ok, if anybody has one I can use I'd greatly appreciate it!!

  4. #4
    Junior Member longcummins's Avatar
    Join Date
    Feb 2013
    Posts
    49

    Default

    Where are you located ? I am in central Ohio if you are close I have a smarty that we could use to reset your boot logger.
    467.7 FMW Stainless Diesel

  5. #5
    New Member
    Join Date
    May 2014
    Posts
    6

    Default

    I'm just outside of Chicago. Im sure that's a bit farther than your willing to drive haha. I've been told not to drive my truck until I get the tune loaded

  6. #6
    Lifetime Member
    Join Date
    Nov 2005
    Posts
    1,753

    Default

    EFILive cannot flash 6.7L vehicles with the 601 bootblock. This particular ECM has a heightened level of security from the factory, and to this end we have decided not to implement the sledgehammer fix the handhelds use. While we develop a complete solution, there is no option to rectify this with EFILive, however you can with a handheld, then use EFILive.

    As a general point, please don't ask us to implement the sledgehammer and then revisit our design...our motto remains do it once and do it right.

    Cheers
    Cindy
    I no longer monitor the forum, please either post your question or create a support ticket.

  7. #7
    Junior Member longcummins's Avatar
    Join Date
    Feb 2013
    Posts
    49

    Default

    My suggestion to you is find someone close to you that will rent loan or what ever you a smarty to fix your boot logger problem then reinstall your efilive tune and never look back . Efilive is the best hands down. If you weren't 8 hrs away I would gladly help you out.
    467.7 FMW Stainless Diesel

  8. #8
    New Member
    Join Date
    May 2014
    Posts
    6

    Default

    Cindy, I'm confused as to what you mean in the second part of your response. However if I offended you in any way, I honestly did not mean to.

  9. #9
    New Member
    Join Date
    May 2014
    Posts
    6

    Default

    Longcummins, I really appreciate it. I found one 2 hours a way but the guy will only sell it to me. And he wants 700.

  10. #10
    Junior Member longcummins's Avatar
    Join Date
    Feb 2013
    Posts
    49

    Default

    Keep looking there are way to many of them around probably closer to you than you realize. Cummins forum, ect....
    467.7 FMW Stainless Diesel

Page 1 of 2 12 LastLast

Similar Threads

  1. Can EFI log data regarding my shifting problem?
    By 5akman in forum Allison 5 & 6 Speed
    Replies: 5
    Last Post: June 13th, 2011, 02:18 AM
  2. EFI Problem, stumped
    By DmaxHawk in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 5
    Last Post: June 12th, 2011, 03:14 PM
  3. EFI Live V2/USB Comunication Problem
    By castewart in forum Duramax LB7
    Replies: 7
    Last Post: May 21st, 2009, 09:55 AM
  4. Efi Live Tuning Problem,, Need Help
    By Boll Curlee in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: November 18th, 2006, 07:43 AM
  5. Problem with linkups with V5 & V6 EFI
    By jbrunton in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: May 3rd, 2006, 01:19 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •