Kind of in a pinch here and need some help. I installed my sinister egr delete kit and flo pro turbo back 5 inch straight pipe. Now this morning i went to install my efi tunes. In the middle of the tuning it says "aborting anti-tune" and then does the count up to 100%. Then it says turn ignition off and counts down from 10. Then it goes back to the main screen, the tune i selected to upload. When i start the truck it runs bogs down goes back to normal idle and continues to do that. Also the check engine light comes on, so i went to scan the dtcs and it gives me an error code. I got my other code reader and scanned it and got4 different codes all egr related. Also it never gave me the option to "license the tuner". What am i missing or doing wrong here? Sorry for the long post. I've been told I have the updated ECM with the Bootloader. I've been told the smarty J67, S67 and raceMe versions will bring it back to stock and get rid of the boot loader so I can then update my efi tunes. Is that correct and are there any other options because I don't have access to a Smarty. If any one in the Chicago/Rockford/southeast wi area has one and is willing to let me borrow it aim willing to pay you.