Results 1 to 3 of 3

Thread: Need help with high idle. (e38 conversion)

  1. #1
    Member
    Join Date
    Nov 2009
    Posts
    52

    Default Need help with high idle. (e38 conversion)

    I am working on an engine conversion in a 1983 Ferrari Mondial. The donor engine is an LZE 3.5L flex fuel from a 2009 Impala (e38 ECM) with a Porsche standard transaxle. The 4T65E and TCM from the donor Impala were not utilized. The car is running and driving now with no problems other than a graduall very high idle. When you initially start the engine at around 75*F ambient, it will idle around 900RPM and gradually work its way up to 1200RPM and eventually up to 1800-2000RPM. Here's the tun file and I'll be happy to log any PIDs needed. The only PID that catches my eye is VSS which is pegged at 158MPH, a side affect of a missing TCM I imagine. Anyone know how I can isolate the table(s) that are causing this high idle? Thanks- Brint.dave ferrari idle tweaks.tun
    Last edited by vortecyota; May 27th, 2014 at 11:26 AM.

  2. #2
    Member
    Join Date
    Nov 2009
    Posts
    52

    Default

    I finally have this issue resolved. A very helpful member here has spent a lot of time helping me via PM. Thanks you very much!!!

    We tried to solve this problem in the tune but ultimately had to install and wire the TCM into the CAN bus in order to get the VSS pid to display 0 mph sitting still. This seems to have cured the high idle situation. It's still hard to believe I have to run a TCM just so the ECM will follow idle commands but I guess I have an oddball conversion here.

    Anyways, thanks for all your help sir!!

  3. #3
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,164

    Default

    Good job, and thanks to whomever helped

Similar Threads

  1. E38 Conversion questions.
    By LS1Inferno in forum E37, E38 & E67 PFI ECM's
    Replies: 4
    Last Post: April 17th, 2013, 05:08 AM
  2. Idle 4.8 to 6.0 conversion
    By etmotorsports in forum Gen III V8 Specific
    Replies: 0
    Last Post: August 31st, 2012, 01:48 PM
  3. 0411/E38 Conversion ?
    By 3fingas in forum Gen IV V8 Specific
    Replies: 3
    Last Post: May 20th, 2012, 01:05 PM
  4. high idle help
    By amiller406 in forum Duramax LB7
    Replies: 3
    Last Post: March 25th, 2011, 06:55 AM
  5. High Idle
    By lucky1 in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 2
    Last Post: January 1st, 2008, 03:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •