Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Tuning PID's are missing??

  1. #1
    Lifetime Member Tinbender59's Avatar
    Join Date
    Jun 2010
    Posts
    289

    Default Tuning PID's are missing??

    I have loaded the Cd 7.5 tune/scan software, started to setup to do the Calc.vet, tried to set up the pid's, but there is no tuning Pids available. I uninstalled the V7.5 came to this site downloded the latest software, and installed, still no Tunning pids?? any ideas?? thanks
    Last edited by joecar; June 9th, 2014 at 12:49 PM. Reason: corrected title (so searchg can find it)

  2. #2
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    Post screenshots.

  3. #3
    Lifetime Member darcy's Avatar
    Join Date
    Feb 2012
    Posts
    223

    Default

    Assume you specifically mean the CALC.PIDS required to undertake Calc.vet?

    From a standard out-of-the-box installation, the customised calculated pids are not included. You can grab the calc_pids.txt file from the Calc.VET thread, post #1.

  4. #4
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    ^ that's it, thanks Darcy.

  5. #5
    Lifetime Member Tinbender59's Avatar
    Join Date
    Jun 2010
    Posts
    289

    Default

    ah cool I figured it had to be something simple, but just to be clear. when you select PID tab then the system drop down menu, (air, O2, tune, bla bla) is at I do not have a "tunning" section this above will fix that so that i can setup the LTFTBIN ans so forth?

  6. #6
    Lifetime Member Tinbender59's Avatar
    Join Date
    Jun 2010
    Posts
    289

    Default

    well that didn't work, and I cant figure out how to get a screen shot, prnt screen wont do it??

  7. #7
    Lifetime Member Tinbender59's Avatar
    Join Date
    Jun 2010
    Posts
    289

    Default

    ok I R SMART!!!! I was putting them in the wrong location. thanks for helping a moron!!! lol

  8. #8
    Lifetime Member Tinbender59's Avatar
    Join Date
    Jun 2010
    Posts
    289

    Default

    also do I need to create a map or will it do that for me. step 3a,3b, and 4 are a little confusing, I feel like there is information missing?

  9. #9
    Junior Member ecir45's Avatar
    Join Date
    Aug 2013
    Posts
    34

    Default

    First post in the Calc.VET thread has all the info and links you need. section III. APPENDIX see summary notes to setup pids and maps, other pertinent info is in the summary notes read that whole thread. I also used the old Calc.VE tutorial as a step by step reference to help creating maps. Tutorial can be fond on the EFI Live home page. Make sure you set the maps up exactly like the pics in the first post of Calc.VET.
    '92 K1500 Blazer, L31, NV3500, TPI, 14 bolt 3.42, 0411, EFI Live
    '99 SCSB Stepside Silverado, 5.3, 4L60e, 10 bolt 3.42, 0411, EFI Live

  10. #10
    Joe (Moderator) joecar's Avatar
    Join Date
    Apr 2003
    Posts
    28,403

    Default

    +1 what ecir45 said... post #1 in the Calc.VET thread contains all the info you need (it has links to point you to a map creation tutorial/video).

Page 1 of 2 12 LastLast

Similar Threads

  1. A lot of PID's missing
    By joshp14 in forum FlashScan V2
    Replies: 17
    Last Post: July 31st, 2011, 11:15 PM
  2. Another missing PID
    By gmh308 in forum Black Box Logging
    Replies: 12
    Last Post: September 29th, 2009, 12:00 PM
  3. Missing PID's in v. 7.5.5 build 84
    By smokeysbandit in forum General
    Replies: 17
    Last Post: May 12th, 2009, 11:07 AM
  4. Missing PID GM.DYNCYLAIR_DMA
    By ssvolvo in forum General (Petrol, Gas, Ethanol)
    Replies: 5
    Last Post: July 27th, 2008, 02:02 PM
  5. PID's Missing or am I missing something
    By dperry in forum Duramax LLY
    Replies: 1
    Last Post: March 1st, 2007, 02:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •