firmware date 6/21/2014
firmware date 6/21/2014
EFILive Beta Tester
2006 DODGE RAM 2500 4X4 Industrial Injection R1 100HP Injectors and BAG-O-PARTS, ATS Exhaust Manifold, AFE 67MM Turbo and MANIFOLD
Not sure how the date/time stamp works when moving files from here (GMT+10 hours) to the US (probably about GMT-10 hours). It could cause the date/time stamp on your file to be 15..20 hours behind the time/stamp on the file I have here. The tell-tale is the minutes are the same at 57 minutes.Originally Posted by garrettg.bpd
Can you please read the CMB.pmm file from your FlashScan using EFILive Explorer and send me that exact file? Send to paul@efilive.com
Regards
Paul
Before asking for help, please read this.
sent
EFILive Beta Tester
2006 DODGE RAM 2500 4X4 Industrial Injection R1 100HP Injectors and BAG-O-PARTS, ATS Exhaust Manifold, AFE 67MM Turbo and MANIFOLD
The CMB.pmm file that you sent me is the correct file. The data logs should be created with PIDs with prefix "CM". I am not sure why that is not the case on your device.
Can you try BB logging again and see what prefix is on the PIDs in the *.efi log file?
Regards
Paul
Before asking for help, please read this.
I just tried logging. Tried passthru and bblogging and both went fine. Not sure what the problem was with that first log. I still cant view the log I posted on the forum. But you fixed that file for me. It was the first log I did after the update. maybe the software was a little unstable. I don't thank I restarted my pc after the update. I'll keep an eye on it and see if it happens again.
thanks
CMB_0011.efi test pt log.efi
EFILive Beta Tester
2006 DODGE RAM 2500 4X4 Industrial Injection R1 100HP Injectors and BAG-O-PARTS, ATS Exhaust Manifold, AFE 67MM Turbo and MANIFOLD
A good restart after installs always seems to work wonders.
Josh
'04 GMC LLY - L5P, Motech, 6-Spd Conv. ML Trans.
'05 GMC LLY - 250%, 12mm, 67mm Custom Turbo, 6-Spd Conv. ML Trans
'19 3500 RAM - Tuned Aisin 0_o
Release switched from a pre-release to public release overnight.
http://www.efilive.com/latest/softwa...e-jun-21-2014/
Cheers
Cindy
I received some .ctz files from a customer we sold an autocal to and EFILive wont open them, any idea whats going on there?
Head Calibrator
Gwatney Performance Innovation
Jacksonville, AR 501-982-2102
Its possible that the customer is using updated software and you have not updated your software to match the version your customer is using.
See the message on this page for more info: http://www.efilive.com/latest/softwa...e-jun-21-2014/
Regards
Paul
Before asking for help, please read this.
Thanks Paul, that did the trick!
Head Calibrator
Gwatney Performance Innovation
Jacksonville, AR 501-982-2102
Posting Permissions
