Page 3 of 3 FirstFirst 123
Results 21 to 22 of 22

Thread: Will the autocal work on the C7 with the E92

  1. #21
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,490

    Default

    Quote Originally Posted by J.Abbott View Post
    We have distance traveled so I can see now where the car is shifting in the 1/4. Now if I can use the time stamp in the recorded data I can easily identify runs. Because we start scanning early before the run the time is screwed up, so if we log time from a pid like a brake pedal going inactive until it is active again then we can know how fast the car ran the 1/4.
    The best way to measure elapsed time between two points on the chart is to click and drag from the first point to the second point. The elapsed time is shown in between the two points and in the lower right corner of the chart display.

    As for recording when the brake pedal is released, you'd need to log BRKR

    Regards
    Paul
    Before asking for help, please read this.

  2. #22
    Senior Member J.Abbott's Avatar
    Join Date
    Aug 2010
    Posts
    113

    Default

    Quote Originally Posted by Blacky View Post
    The best way to measure elapsed time between two points on the chart is to click and drag from the first point to the second point. The elapsed time is shown in between the two points and in the lower right corner of the chart display.

    As for recording when the brake pedal is released, you'd need to log BRKR

    Regards
    Paul
    Paul,
    Thanks it gets it close enough. I am already logging BRKR was just looking to put a time stamp on it. It is close enough though thank you

Page 3 of 3 FirstFirst 123

Similar Threads

  1. E92 GM computer
    By joelp in forum Petrol / Gas
    Replies: 6
    Last Post: November 15th, 2013, 08:25 AM
  2. Will Autocal work with E78?
    By Patrick G in forum AutoCal
    Replies: 4
    Last Post: November 4th, 2013, 09:53 AM
  3. E92 Not being supported yet?
    By 05gmcsierra in forum E39, E80, E82 & E92 SIDI ECM's
    Replies: 2
    Last Post: October 15th, 2013, 03:13 PM
  4. Replies: 1
    Last Post: September 19th, 2011, 08:38 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •