Need help guys

[wickedcummins]

How do I remove edit the file so it don't see/ use MAF.

[joecar]

Remove the MAF, you should see an immediate MAF DTC.

Set C2901 to 1, set C6001 to 1-Trip.

[wickedcummins]

LS1B stock filer.ctz man I have tried this and its not letting me flash it in this is my OE file

[wickedcummins]

OK I dunno I tried it a few times and it finally worked.. Cars much Happier now.. Now to work tunning... THanks boys.. How do I rescale the map for 3 bar? It only shows 280kpa

[Tre-Cool]

the main ve map is from 0-105kpa - that's 1 bar. the custom efilive ve map is for your boost 105-205 is 2bar. 205-280 is for anything above 2bar.

[wickedcummins]

Thank you much appreciated

[wickedcummins]

Remove the MAF, you should see an immediate MAF DTC.

Set C2901 to 1, set C6001 to 1-Trip.

I set C2901 to 1 but cant find c6001 and search comes up with nothing as well

[wickedcummins]

Also is there a way to rescale intake air temp sensor and coolant temp sensor ?

[joecar]

C6001 is the Engine DTC Enabler table, it's in the Engine Diagnostics section.

[wickedcummins]

Got one bank pulling -32 short term and other side is -5.