Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Copy and paste where did it go?

  1. #1
    Junior Member longcummins's Avatar
    Join Date
    Feb 2013
    Posts
    49

    Default Copy and paste where did it go?

    I updated to the latest software update and now my copy and paste function no longer works! Isthis something in the latest update or in my PC screwing up?

  2. #2
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    A few more specifics please, what are you trying to copy/paste?
    I no longer monitor the forum, please either post your question or create a support ticket.

  3. #3
    Junior Member longcummins's Avatar
    Join Date
    Feb 2013
    Posts
    49

    Default

    I am trying to change pilot injection quantity on quantity base and then copy and paste that to the air density 1, 2, 3 ect... hope that explains what i am trying to do. It has always worked for me when copying and pasting until yesterday when I updated the system.

  4. #4
    Junior Member longcummins's Avatar
    Join Date
    Feb 2013
    Posts
    49

    Default

    I use to be able to copy the timing tables and paste them on the air density tables 1,2,3 ect as well and now I am no longer able to do that either. Maybe it something wrong with this new PC I don't know but i appreciate the help.

  5. #5
    Junior Member longcummins's Avatar
    Join Date
    Feb 2013
    Posts
    49

    Default Copy and paste where did it go?

    So was this a dumb question or what ?
    Last edited by longcummins; July 8th, 2014 at 10:16 AM. Reason: dumb phone
    467.7 FMW Stainless Diesel

  6. #6
    Senior Member
    Join Date
    Feb 2012
    Posts
    136

    Default

    Hey longcummins, if you are copying the entire table I use hot-keys, Ctrl A to select all, Ctrl C to copy, then go to your table 1, Ctrl A to select all, then Ctrl V to past. Give that a shot.

    Sam

  7. #7
    Junior Member longcummins's Avatar
    Join Date
    Feb 2013
    Posts
    49

    Default

    Cool deal I will give that a try when I get home this evening.
    467.7 FMW Stainless Diesel

  8. #8
    Senior Member
    Join Date
    Feb 2012
    Posts
    136

    Default

    You should be good to go, I have not had any problems with any table that I have done with the above procedure.

    Sam

  9. #9
    Junior Member longcummins's Avatar
    Join Date
    Feb 2013
    Posts
    49

    Default

    Yes that doesn't work either. I get this thing that comes up and its saying something about running scripts files. Then looking into that it seems its all about GM products LMM LBZ ect.... and DSP 2 and DSP 5 so I dont understand what I may changed unknowingly. Still trying to figure this out. Thanks for the help 30RUM.

  10. #10
    Senior Member
    Join Date
    Feb 2012
    Posts
    136

    Default

    If you don't mind me looking at the file, you can send it to me and I can give it a try. That would eliminate any computer problems. I just had no problems copying and pasting in an LMM & LBZ file both DSP5. Strange, my email is samk408@msn.com

Page 1 of 2 12 LastLast

Similar Threads

  1. Can't copy and paste from excel to v7.5?
    By kkslds in forum FlashScan V2
    Replies: 1
    Last Post: November 22nd, 2013, 09:34 AM
  2. AutoVE copy and paste
    By amiller406 in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: April 14th, 2012, 01:38 PM
  3. cant copy and paste with 7.5
    By articSS in forum Gen III V8 Specific
    Replies: 5
    Last Post: October 7th, 2008, 11:18 AM
  4. Copy and Paste
    By Lextech in forum Custom Operating Systems
    Replies: 4
    Last Post: January 2nd, 2007, 04:34 PM
  5. Do we have a copy and paste feature
    By Dirk Diggler in forum General
    Replies: 10
    Last Post: February 20th, 2005, 05:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •