calc.vet without wide band o2 please help

[nick123]

ok so new to tuning
trying to do calc vet
when transfering selbens over to tune file dosent work

[nick123]

[nick123]

[nick123]

paste and multiply by 50% seemed to work but why???

[joecar]

Are you following post #1 in this thread: Cacl.VET thread...?

If you have no wideband, you have to edit the CALC.SELBEN pid in calc_pids.txt to always use CALC.LTFTBEN.

In your maps, you forgot to include the units on the axis (in map properties, on Col and Row tabs, checkmark Show Units).

[nick123]

yes calc.vet thread
ok got maps changed !
how do i know what lines of code refer to selben.... maf vs. sae.rpm??
or do i just delete the wbo2 parts ???
can i rename it?? dumb question ...probably not...

[nick123]

can somebody help?? what exactly should my calc_pids.txt look like??
would it really matter since i have no wbo2 there is no input from that...
do i just delete clc 00 220 ???!!
im a tradesperson not much programming background.
thanks in advance!!

[statesman]

Joecar has already told you what to do.

If you have no wideband, you have to edit the CALC.SELBEN pid in calc_pids.txt to always use CALC.LTFTBEN.

[joecar]

i.e. in calc_pids.txt change this:

*CLC-00-220
factor             0.5           1.5       .4  "iff({CALC.CL}, {CALC.LTFTBEN}, {CALC.WO2BEN})"

to this:

*CLC-00-220
factor             0.5           1.5       .4  "iff(1, {CALC.LTFTBEN}, {CALC.WO2BEN})"

using a non-formatting editor (e.g. like Notepad, and not like Word).

[joecar]

And of course, you will have to filter out all data for which CL is not 1 (i.e. with LTFTBEN only, then only the frames for which CL is 1 are valid).