I have confirmed aux output voltage from the afr monitor is working correctly. It reads 4.5v in free air and with the car running it was fluctuating between 1.8v-2.2v on my meter with an afr in the high 12s- low 13s.
When I connect to the V2 I still don't get any correct data when any one of the CALC.NTK_AFX.LAM, CALC.NTK_AFX.EQR, CALC.NTK_AFX.AFR. That pid just freezes up on a log.
I'm wondering if it will be easier to start over with a new calc. pid. I don't use and other analog inputs anyway.
Reply With Quote
