Results 1 to 3 of 3

Thread: Error $0322 kodiak 4500

  1. #1
    New Member
    Join Date
    Nov 2013
    Posts
    6

    Default Error $0322 kodiak 4500

    Tried to pull the stock tune for a friend who purchased this
    Kodiak. The Dpf has been deleted with a straight pipe, now throwing soot
    Accumulation/both ETS codes. Saw no Dpf section in stock tune, so,
    Tried to disable reporting on codes and flash stock tune back and get script error
    $0322 it is OS 12620015 any ideas? Please help?

  2. #2
    Diesel Forum Support Site Admin
    Join Date
    Nov 2005
    Posts
    1,711

    Default

    Can you please make sure you are running the latest software and firmware.

    All of our calibration files were 're-generated' in February, so it's ultra important to update V7 and V8 software along with Firmware and bootblock. Software, along with current build numbers can be found here http://www.efilive.com/latest/cat/download-efilive

    How were you flashing the controller - V8 standalone, V8 pass-through or V7?

    Cheers
    Cindy

  3. #3
    New Member
    Join Date
    Nov 2013
    Posts
    6

    Default

    Cindy,
    Thank you for your reply. I was using V8 pass-through. The issue was something simple. This was a former "marta" shuttle bus. Upon crawling under the dash...I found an inline female OBD2 to male OBD2 connector for I take it, some kind of driver monitoring system to the OE OBD2 connector...unhooked the female and plugged the v2 in the OE connector and had success tuning it. It had some issues with some parts being removed mechanically but not electronically. All is well now.

Similar Threads

  1. 2008 Dodge 4500 error codes
    By DieselPower in forum Diesel
    Replies: 0
    Last Post: December 19th, 2013, 07:41 AM
  2. Kodiak 06 LLY tuning
    By LS1FREEK in forum Duramax 06 LLY / 06+ LBZ & LMM
    Replies: 7
    Last Post: November 29th, 2011, 02:28 AM
  3. Getting codes $0322, $0312 Need Help!
    By toloud4u28 in forum FlashScan V2
    Replies: 5
    Last Post: October 31st, 2010, 01:46 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •