The January 27th release has the misc speed limiters in it to fix the issue :-)
The January 27th release has the misc speed limiters in it to fix the issue :-)
Dan's Diesel Performance
www.dansdieselperformance.com
Hey Guys, I wanted to give a big THANKS!! Your suggestions worked perfectly!! No More DIC Message...A couple small items and I'll be ready to rock and roll!!
You're welcome.
Dan's Diesel Performance
www.dansdieselperformance.com
I am new to this forum but the reason im bumping this thread is because I am having the exact same issue as the OP mentioned in his first post. 150-175 it'll limp the truck, no codes, no lights, no messages. The truck is a 2015 LML also. I understand sometimes it's not the smartest idea to go into the CAN and start disabling things but I see Robert seemed to fix his issue in the CAN. I PMed him but he hasn't been on in a few days and any help now would be greatly appreciated!
Thank you
My email is blakecrenshaw@yahoo.com I tried posting but said a mod would have to view before It was visible, but I did turn disable what you have below but still limits me. I did miss a couple of Nox sensor parameters in the lower can tables, so hoping to disable those two nox tables and it works. If you could email me Robert I would appreciate it!
Last edited by Sickll7crenshaw; August 20th, 2016 at 04:04 AM.
I TUNE STUFF
What happened to that crenshaw guys post?
Last edited by rcr1978; August 21st, 2016 at 03:19 AM.
04 LB7
2010 LMM
2015 LML
It's blakecrenshaw@yahoo.com
Yes sir made those changes to the table and still limps the truck although I did miss two Nox sensor in the lower can tables that are by themselves, maybe I need to disable those also and then it will work?
I TUNE STUFF