Update: Sep 12, 2014

[Chavez91]

Rather than reprogram Options.txt, Config files and then move your 5 tune files you should utilize the Quick Setup. The Quick Setup will allow you to set the remote license on all 5 tunes WITHOUT opening the tune files, and other security levels (if selected) auto-adjust, so in your case if you attempted to select FULL FLASH for an E86B, the software would automatically adjust your compatibility to CAL-ONLY.

Cheers
Cindy

I knew about the Quick Setup. Just haven't sat down and played around with it yet. Will do that later tonight. We got the truck flashed successfully tho

[GMPX]

Is the TC1796 RSA protected also? Just outta curiosity and clarification.

All Bosch TriCore based ECM's are, all of them and the level of protection gets worse with each new ECM

[Chuck CoW]

Paul.. Back to the drawing board.. The new update does not fix the problem with the cax.... It's made it worse.

sending E-mail now.....

Kory... Please test your tunes with .cax cause I every file I open blocks my .caxs and then say the tune file is a "bad tune file format"

What's happening on your end?

Chuck CoW

[GMPX]

Chuck, have you sent all the files you are using to Paul to see if he can duplicate it?

[Chavez91]

Paul.. Back to the drawing board.. The new update does not fix the problem with the cax.... It's made it worse.

sending E-mail now.....

Kory... Please test your tunes with .cax cause I every file I open blocks my .caxs and then say the tune file is a "bad tune file format"

What's happening on your end?

Chuck CoW

Getting the same exact thing.... If I open a file with the CAX active i get this...



Rename CAX to something else and file opens just fine.

What files do you want emailed to you and where to email them?

[Chavez91]

It appears that only paste is not working when Internet Explore is running and minimized

Just tried this... and copy paste is working fine for me with IE running and minimized. Im on Win7 and using a LLY Dmax File.

[BlackCPG]

Still having the issue with .cax file on Build 265.

The address defined in the cax is not $FFFFFFFF

It will not load either the cax or the calz calibrations. It shows unrecognized PCM and saves the file as BadTuneFileFormat.tun

[Brayden]

I no longer have the ability to open any .bin files in v7.5 tuning tool. Can that be remedied asap please? :-(

[Brayden]

Also gives an Integer overflow error in V8 Tune tool upon loading a .bin

[ATPCummins]

I do like the newer version of the quick setup. Can an additional option be added to security description defaults (or somewhere similar)? I would like to see this option: Private, Full Flash, Set Device License to Flashscan Serial, and Link to Remote Autocal. This would allow all options to be set at once. I would also like to be able to lock the tunes without having to save the quick setup as a new file so that I can just program the quick setup into an autocal. I don't need the saved file. Hopefully this makes sense. Maybe I am missing a something, IDK...