Originally Posted by
cindy@efilive
Under the [F5: BBX] Menu, ensure you have setup your BBL controllers and selected the PID's to be used. There are 2 methods to "Program" these onto the FlashScan; you can either select the Program Button from the F5: BBX] -> [F2: Scan] menu, or you can select them in the [F2 Scan] menu, then move to [F6: Quick Setup].
The quick setup will allow you to format and update the config files we spoke about above, program [F2 Scan] and [F3 Tune] selections in one single pass as well as allow you to move your chosen tune files to the device in one single step. Device settings and tune security can also be managed via the Quick Setup. These features were significantly enhanced in this weeks release, and are fully documented in the V8 Reference manual. Using the Quick Setup will for many tuners become the 'norm' for dealing with remote customers. No updating config files, no managing tune files via EFI Explorer - simply 'configure' their device in this screen and have them save the file on their local PC, open V8 and select program and it's all done.