Results 1 to 3 of 3

Thread: E38 and T43 stock files required.

  1. #1
    Member TuneMaster's Avatar
    Join Date
    Mar 2006
    Posts
    75

    Default E38 and T43 stock files required.

    Hi Guys,

    I'm after stock E38 and T43 files with the following OS's

    VIN 6G1EP55H37Lxxxxxx

    E38
    Control Module Calibration Release - Initial Release
    Service Pack 1

    12612381 Main Software Calibration Module
    92205533 System Calibration Module
    92196978 Fuel Calibration Module
    92196092 Speed Calibration Module
    92205531 Engine Diag. Calibration Module
    92205540 Engine Calibration Module

    T43
    VE Holden T43 RPR4 Release - 6speed V8
    Auto Transmission Calibration

    24239353 Software Calibration Module
    92216585 Transmission Calibration Module
    92216586 Transmission Diagnostic Calibration Module
    92216587 System Calibration Module

    If anyone has these files can you please post them.

    Thanks.

  2. #2

    Default

    Here you go

    the tcm tune is the the only one i have close to what you want
    330 rwkw EFILIVE OS 01290005 SD Cam / Head Tuned 6 speed VY SS Commodore
    10/71 Blown 572 Big Block Chev HQ 2 Door Monaro

    GM Performance Centre
    Busselton WA
    AUSTRALIA
    Phone: 0447 003050

  3. #3
    Member TuneMaster's Avatar
    Join Date
    Mar 2006
    Posts
    75

    Default

    Thanks for posting those up, I saw them on Tune File Depot and was wanting the files with the exact segments as well as os, the ecm is very close and I will try it.

Similar Threads

  1. T43 cax files?
    By Rhino79 in forum 6 speed/8 speed RWD/FWD Transmission Tuning (incl T43, T76, T87)
    Replies: 0
    Last Post: February 4th, 2012, 12:18 PM
  2. Minimum Sensors required on an E38 (BBC)
    By NateD4 in forum Petrol / Gas
    Replies: 9
    Last Post: July 21st, 2011, 07:55 AM
  3. 2009 E38 & E67, software update required
    By GMPX in forum E37, E38 & E67 PFI ECM's
    Replies: 2
    Last Post: January 15th, 2009, 05:55 PM
  4. E38 stock files needed
    By Lennart in forum E37, E38 & E67 PFI ECM's
    Replies: 3
    Last Post: February 10th, 2008, 04:42 PM
  5. Is THIS required equired to edit files?
    By 2000ssnb in forum General (Petrol, Gas, Ethanol)
    Replies: 4
    Last Post: January 15th, 2005, 11:20 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •