Page 1 of 2 12 LastLast
Results 1 to 10 of 17

Thread: VS V6 xml file

  1. #1
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    568

    Default VS V6 xml file

    Why is the VS V6 xml file so basic in parameters compared to all the other holden xml's??
    It's all good until it goes "Bang"

  2. #2
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,760

    Default

    I must confess I remember about 1% of the old ALDL stuff, so I don't know, but TBH, V4 is what it is, it is free now isn't it?
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  3. #3
    Junior Member T2000's Avatar
    Join Date
    Mar 2010
    Posts
    36

    Default

    I love efilive. But V4 / aldl stuff hasnt had any love around here for a loooong time.
    I use TunerPro software and Moates Hardware for everything pre LS1... it is still in active development with an active online community. The definitions are extensive for almost any delco pcm you can name... jump to http://pcmhacking.net/ if you want a viable alternative to efilive v4

    goodluck

  4. #4
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    568

    Default

    Yeah,I know about tunerpro and pcmhacking,and no,V4 is still US $199,you may think V4 is what it is,but just that little bit more in the VS xml would be nice.
    It's all good until it goes "Bang"

  5. #5
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,760

    Default

    Sorry I didn't realise that, V4 is Paul's little baby.
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  6. #6
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    We are looking at making V4 a free product once ALDL support is implemented in the EFILive V8 (FlashScan/AutoCal) package.

    Regards
    Paul
    Before asking for help, please read this.

  7. #7
    Senior Member
    Join Date
    Nov 2007
    Posts
    172

    Default

    V4 is still a very good package for ALDL logging, the charts aren't like what we are used to with v7 but when it was released it was certainly the best around and still is in terms of ALDL software, I wish I had the ability to plot on different scales and zoom but I'm sure that will all be addressed in V8..

    The definitions on the TunerPro stuff is only very recent addition. 3 years ago the definitions for logging were pretty sparse. You can look at the items defined in TunerPro and add them to V4 if you want. It's not too difficult

  8. #8
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    Quote Originally Posted by limited cv8r View Post
    Why is the VS V6 xml file so basic in parameters compared to all the other holden xml's??
    Just wondering what other Holden definitions you're comparing the VS V6 one to? Most of them have very similar content to the VS V6, except the gmh-vr68vs8.xml which is more extensive (has more bidirectional controls) because that's the vehicle that we did most of the development work on (i.e. reverse engineering) for the ALDL data stream.

    Regards
    Paul
    Before asking for help, please read this.

  9. #9
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    568

    Default

    Hit the nail on the head, it's more the bidirectional stuff that would be nice. Had car on dyno,would of been so nice to have been able to lock trans in gear.
    It's all good until it goes "Bang"

  10. #10
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,119

    Default

    I have no idea if the VS V8 bidi controls would work on a VS V6 but its worth a try.
    Regards
    Paul
    Before asking for help, please read this.

Page 1 of 2 12 LastLast

Similar Threads

  1. XML file for OBD-I car
    By zhivat in forum General
    Replies: 1
    Last Post: October 12th, 2013, 09:13 AM
  2. Why is there no 3.1L XML
    By JThein1989 in forum EFILive V4
    Replies: 1
    Last Post: April 30th, 2010, 06:44 PM
  3. EFI Live V4 xml file for 94 Regal 3800
    By MasterOfTheJawan in forum EFILive V4
    Replies: 3
    Last Post: December 29th, 2009, 06:40 AM
  4. Vehicle XML file for 1992 buick lesabre
    By MarkS in forum EFILive V4
    Replies: 4
    Last Post: February 6th, 2009, 05:01 PM
  5. which xml for 94 HSV VR 5L V8?
    By 94hsvvr in forum EFILive V4
    Replies: 3
    Last Post: November 6th, 2008, 07:06 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •