Results 1 to 5 of 5

Thread: new and need help

  1. #1
    New Member Luvss350's Avatar
    Join Date
    Oct 2014
    Posts
    6

    Default new and need help

    Hi all im new to efi live, tuning, and the forum. I have a 96 Silverado with GMs ht383e 1 inch tb spacer k&n intake system, headman longtube headders, 2.5 inch exhaust and 0411 pcm. I had it tuned by 2 people and it is like driving a geo metro. it has a max of 20 deg of timing at wot or psrt throttle. im hopping for some advice or if someone can look at the tune I attached and maby make changes or tell me what to change. the tune I attached is what I pulled out of the pcm.

  2. #2
    New Member Luvss350's Avatar
    Join Date
    Oct 2014
    Posts
    6

    Default

    96 CHEVY CA TUNE NO TIMING.ctz ok I think I got it attached this time.

  3. #3
    New Member Luvss350's Avatar
    Join Date
    Oct 2014
    Posts
    6

    Default

    No body? No advice or anything?

  4. #4
    Junior Member
    Join Date
    Oct 2008
    Posts
    37

    Default

    Hi Mate, there seems to be a few calibrations that are "Out of Range". Torque Limiting, Hot PE Mode etc..Maybe set them a little lower than the EFILive soft limits, flash the tune back in and take some logs and attach them here.
    VE Clubby 237/243@112 .618/.614

  5. #5
    New Member Luvss350's Avatar
    Join Date
    Oct 2014
    Posts
    6

    Default

    Jester thanks for replying! ca tune from town.efiI took this before I changed anything. I have not fixed the cam retard yet have not had the time but I do know that needs to be done. i have fixed all the out of range calibrations. looking for any help to go in the right direction.
    thanks Joe

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •