Duramax With Edge Insight

[WisconsinHick1]

Well I got one ecm to take with 7.5.

But I think the second one is shot.

17:34:12.843: Scanning for EFILive FlashScan V2 HAPI
17:34:12.859: Autodetect interface ...
17:34:13.074: Interface firmware version: 2.7.64
17:34:13.074: Connection to [FSV2] interface is OK
17:34:13.089: CAN-VPW Bridge Activated
17:34:13.138: Current protocol set to: "SAE J1850 VPW"
17:34:13.138: Autodetect PCM...
17:34:13.185: Connection to PCM is OK
17:34:13.201: Current protocol: "SAE J1850 VPW"
17:34:13.404: USB driver version: 2.8.40
17:34:13.404: USB library version: 3.2.7
17:34:13.419: Interface firmware model: FSV2
17:34:13.419: Interface firmware version: 2.7.64
17:34:13.436: Interface firmware date: Jul 19, 2014
17:34:13.444: FlashScan serial number: 003603096380
17:34:13.444: FlashScan license number: 003487846557
17:34:13.706: Getting status...
17:34:13.753: Status: OK.
17:34:22.538: Disconnecting ...
17:34:22.915: CAN-VPW Bridge Deactivated
17:34:22.931: Disconnected
17:34:23.612: Scanning for EFILive FlashScan V2 HAPI
17:34:23.628: Autodetect interface ...
17:34:23.833: Interface firmware version: 2.7.64
17:34:23.848: Connection to [FSV2] interface is OK
17:34:24.056: USB driver version: 2.8.40
17:34:24.056: USB library version: 3.2.7
17:34:24.056: Interface firmware model: FSV2
17:34:24.071: Interface firmware version: 2.7.64
17:34:24.071: Interface firmware date: Jul 19, 2014
17:34:24.087: FlashScan serial number: 003603096380
17:34:24.102: FlashScan license number: 003487846557
17:34:24.118: Disconnecting ...
17:34:24.489: CAN-VPW Bridge Deactivated
17:34:24.505: Disconnected
17:34:25.181: Scanning for EFILive FlashScan V2 HAPI
17:34:25.197: Autodetect interface ...
17:34:25.410: Interface firmware version: 2.7.64
17:34:25.410: Connection to [FSV2] interface is OK
17:34:25.426: CAN-VPW Bridge Activated
17:34:25.473: Current protocol set to: "SAE J1850 VPW"
17:34:25.473: Autodetect PCM...
17:34:25.520: Connection to PCM is OK
17:34:25.535: Current protocol: "SAE J1850 VPW"
17:34:25.742: USB driver version: 2.8.40
17:34:25.742: USB library version: 3.2.7
17:34:25.742: Interface firmware model: FSV2
17:34:25.758: Interface firmware version: 2.7.64
17:34:25.758: Interface firmware date: Jul 19, 2014
17:34:25.773: FlashScan serial number: 003603096380
17:34:25.773: FlashScan license number: 003487846557
17:34:26.058: Getting status...
17:34:26.090: Status: OK.
17:34:26.943: Bootloader version: DLB7_v1.5F (08AA-B073)
17:34:26.943: Preparing ECM for reflash...
17:34:26.974: ECM seed is: $DE57
17:34:26.974: Unlock attempt 1 of 4
17:34:27.370: Unlock attempt 2 of 4
17:34:27.749: Not ready, waiting 1 second for retry...
17:34:29.009: Not ready, waiting 1 second for retry...
17:34:30.267: Not ready, waiting 1 second for retry...
17:34:31.526: Not ready, waiting 1 second for retry...
17:34:32.778: Not ready, waiting 1 second for retry...
17:34:34.035: Not ready, waiting 1 second for retry...
17:34:35.293: Not ready, waiting 1 second for retry...
17:34:36.562: Not ready, waiting 1 second for retry...
17:34:37.813: Not ready, waiting 1 second for retry...
17:34:39.068: Unlock attempt 3 of 4
17:34:39.451: Unlock attempt 4 of 4
17:34:39.829: Not ready, waiting 1 second for retry...
17:34:41.093: Not ready, waiting 1 second for retry...
17:34:42.355: Not ready, waiting 1 second for retry...
17:34:43.625: Not ready, waiting 1 second for retry...
17:34:44.884: Not ready, waiting 1 second for retry...
17:34:46.131: Not ready, waiting 1 second for retry...
17:34:47.387: Not ready, waiting 1 second for retry...
17:34:48.637: Not ready, waiting 1 second for retry...
17:34:49.886: Not ready, waiting 1 second for retry...
17:34:51.140: Initializing ECM...
17:34:51.904: Initializing ECM, step 1 of 4
17:34:51.904: Initializing ECM, step 2 of 4
17:34:52.673: Initializing ECM, step 3 of 4
17:34:54.146: Initializing ECM, step 4 of 4
17:34:54.429: ECM lock has been re-armed, attempting to unlock ECM again...

17:34:54.448: ECM seed is: $DE57
17:34:54.448: Unlock attempt 1 of 4
17:34:54.827: Unlock attempt 2 of 4
17:34:55.198: Not ready, waiting 1 second for retry...
17:34:56.451: Not ready, waiting 1 second for retry...
17:34:57.701: Not ready, waiting 1 second for retry...
17:34:58.943: Not ready, waiting 1 second for retry...
17:35:00.206: Not ready, waiting 1 second for retry...
17:35:01.456: Not ready, waiting 1 second for retry...
17:35:02.700: Not ready, waiting 1 second for retry...
17:35:03.949: Not ready, waiting 1 second for retry...
17:35:05.202: Not ready, waiting 1 second for retry...
17:35:06.464: Unlock attempt 3 of 4
17:35:06.823: Unlock attempt 4 of 4
17:35:07.193: Not ready, waiting 1 second for retry...
17:35:08.438: Not ready, waiting 1 second for retry...
17:35:09.690: Not ready, waiting 1 second for retry...
17:35:10.927: Not ready, waiting 1 second for retry...
17:35:12.165: Not ready, waiting 1 second for retry...
17:35:13.423: Not ready, waiting 1 second for retry...
17:35:14.670: Not ready, waiting 1 second for retry...
17:35:15.918: Not ready, waiting 1 second for retry...
17:35:17.175: Not ready, waiting 1 second for retry...
17:35:18.425: Initializing ECM...
17:35:19.165: Initializing ECM, step 1 of 4
17:35:19.165: Initializing ECM, step 2 of 4
17:35:19.912: Initializing ECM, step 3 of 4
17:35:21.392: Initializing ECM, step 4 of 4
17:35:21.677: ECM lock has been re-armed, attempting to unlock ECM again...

17:35:21.834: Initializing bootloader...
17:35:21.902: Error: Failed. Controller has returned to normal operation, please retry the operation.
17:35:22.139: Initializing bootloader, step 1 of 5
17:35:22.139: Error
17:36:16.337: ECM is in an unknown state.
17:36:18.491: Clear emisison related DTCs...
17:36:18.507: Clear DTCs for all modules...
17:36:19.343: Disconnecting ...
17:36:19.720: CAN-VPW Bridge Deactivated
17:36:19.720: Disconnected
17:36:19.736: Data transfer was interrupted.
17:36:26.637: Done!

[Mitco39]

Its not shot, if your communicating with it there is still life there. Do you have a remote start or security system at all in the truck? When installers install it they tap into the purple wire at the back of the OBD plug. On the 01-05 trucks this has to be either cut or removed during the flash process as 9 times out of 10 it will kick EFI Live out.

[WisconsinHick1]

That was the message when I was flashing on my bench top stand alone harness. I will try it on the truck tonight and no it is a bare bones work truck with no remote start or security system. But I will check the OBD wires on the truck to make sure no one tapped into it.

[Mitco39]

Have you tried the repair flash that comes up after it thinks the computer is in a unknown state? Its been awhile but I believe its a Red Cross button that shows up?

[WisconsinHick1]

That I have not. I will give that a go.

[WisconsinHick1]

Still no luck. But I still have communication with the ECM.