Joe,
I've done several things in the last week.
- I've logged some data since I didn't have any red x's with my original OS (9381344) which has a backup VE table.
- I've re-flashed my PCM to a newer OS (12208322) that does not have a backup VE table. I transferred all pertinent parameter values to the new OS and everything seems to work fine plus I now have even more PIDS (383).
- I've logged data several times with the following results:
- Refined MAF Sensor Calibration using LTFT BEN Data
- Determined that my ten year old PLX WBO2 displays but is inaccurate using bidirectional control of AFR while monitoring WBO2/Commanded AFR/NBO2 Voltages (sensor is probably dying so I've ordered a new generation unit...see attached screen shot)
- Determined that I can't get the Calculated VET BEN to tell me anything to correct my existing VE table.
Questions:
Please review the attached logged data file to see if you can determine what I am doing wrong. I can't get the forum to upload my CALC.VET.map file as I am told that it is an invalid file type.
Thanks,
Steve