Results 1 to 3 of 3

Thread: Neat flash scan tip

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Lifetime Member
    Join Date
    Sep 2003
    Posts
    688

    Default Neat flash scan tip

    Go to edit properties and click the Display as AFR radio button. Now instead of your Pe vs. RPM table and your open loop fa table reading 1.0 or 1.13 it will now say 14.7 and 12.6.

  2. #2
    Lifetime Member
    Join Date
    Oct 2003
    Posts
    505

    Default Re: Neat flash scan tip

    Quote Originally Posted by Dirk Diggler
    Go to edit properties and click the Display as AFR radio button. Now instead of your Pe vs. RPM table and your open loop fa table reading 1.0 or 1.13 it will now say 14.7 and 12.6.
    If I had this great feature from the beginning I wouldn't know that 14.7/1.13 = 13.0. NOT 12.6.


    I'm just pulling your chain Dirk. Messin' for Fun! :P
    Thanks for the headsup

    Cheers,
    joel

  3. #3
    Lifetime Member
    Join Date
    Sep 2003
    Posts
    688

    Default

    Owned by my typing :P

Similar Threads

  1. Flash Scan V2 problems
    By loafycleetus in forum FlashScan V2
    Replies: 4
    Last Post: April 20th, 2009, 01:51 AM
  2. Where is Flash Scan update 2.04.57?
    By Spindoctor in forum General (Petrol, Gas, Ethanol)
    Replies: 1
    Last Post: February 6th, 2008, 12:49 PM
  3. Flash Scan Support LS2?
    By trudynosports in forum General (Petrol, Gas, Ethanol)
    Replies: 7
    Last Post: August 22nd, 2005, 08:15 PM
  4. Few flash scan questions
    By Dirk Diggler in forum General (Petrol, Gas, Ethanol)
    Replies: 10
    Last Post: October 25th, 2004, 03:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •