Yes, just minorly tweak portions of the VE table (rule of thumb: if Calc.VET produces a good smooth MAF with correct IFR data, and the produced VE table is dubious, then make your own adjustments to VE... you will eventually have to isolate VE (disable MAF) and tune it using Calc.MAFT.


Also, did you remember to apply the transient filter before applying the maps to the tune (as shown in the Calc,VET thread)...?

If the AFR (or Lambda) did not reach the PE commanded richness level, then either the air model is still not right, or PE ramp in is too slow, or the wideband is not reading correctly

( make sure you use Lambda from the wideband and avoid AFR ).