I have customer with both a duramax and a 5.9 dodge. the autocal works great on both trucks. but will only data log a duramax.. customer tried data logging a dodge and will not. what could I do to correct this
I have customer with both a duramax and a 5.9 dodge. the autocal works great on both trucks. but will only data log a duramax.. customer tried data logging a dodge and will not. what could I do to correct this
Black Box Logging is only supported for CMB and CMC controllers that have EFILive's CSP5 installed. Only the CSP5 EDA (Enhanced Data Acquisition) PIDs are supported for Black Box Logging.
Pass-through logging is available via V7.5 software for those users who have not upgraded to CSP.
Cheers
Cindy
ok thanks cindy. this truck has not been upgrade to the csp5 but were on 7.5 would I need to go to. I havnt data logged a dodge yet on the 7.5
If you open the V7 Scan Tool software, then select HELP -> Documents and open the V7 Scan Tool Manual. There is a section on how to setup logging.
Cheers
Cindy
thank you very much cindy