Results 1 to 2 of 2

Thread: VZ or VE Maf Sensor

  1. #1
    Lifetime Member limited cv8r's Avatar
    Join Date
    May 2005
    Posts
    567

    Default VZ or VE Maf Sensor

    Looking at the two maf sensors they are almost physically the same size apart from length. Is there really any great advantage in airflow between the two? Does the VE maf maybe record a lower Hz for the same airflow?
    Pics attached.
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	IMG_20141130_115339_172.jpg 
Views:	188 
Size:	1,006.8 KB 
ID:	17756   Click image for larger version. 

Name:	IMG_20141130_115313_109.jpg 
Views:	178 
Size:	462.2 KB 
ID:	17757   Click image for larger version. 

Name:	IMG_20141130_115252_765.jpg 
Views:	189 
Size:	421.0 KB 
ID:	17758  
    It's all good until it goes "Bang"

  2. #2
    Lifetime Member
    Join Date
    Aug 2006
    Posts
    412

    Default

    The longer of the two MAF sensors appears to be bigger---At least on the outside. That means the inside "should" be bigger and flow more air. How much more air, I don't know. I would say your MAF tables would definitely need to be touched up after that install.

    Jeff
    98 GMC RCSB 2WD, Internally stock 305 w/Twin T-3 junkyard Turbos,4L80e,Ramjet intake,42lb.inj., 0411PCM, COS3,4675LBS w/me in it. Best Time on 5 passes-13.01@110

Similar Threads

  1. MAF Sensor Calibration '98 Trans Am
    By 12_Square in forum Gen III V8 Specific
    Replies: 3
    Last Post: January 6th, 2014, 07:37 PM
  2. Tuning Around a MAF Sensor
    By WisconsinHick1 in forum Duramax LLY
    Replies: 0
    Last Post: May 6th, 2013, 01:50 PM
  3. 5 wire maf/iat sensor
    By vcls1 in forum Gen IV V8 Specific
    Replies: 6
    Last Post: May 7th, 2012, 12:27 PM
  4. IAT Sensor when MAF bypassed
    By Robbie The Wrench in forum Gen III V8 Specific
    Replies: 9
    Last Post: August 16th, 2008, 07:33 AM
  5. AutoVE MAF sensor calibration
    By Ritch in forum Gen III V8 Specific
    Replies: 7
    Last Post: June 21st, 2007, 09:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •