Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: lml delete

  1. #11
    Junior Member
    Join Date
    Apr 2017
    Posts
    41

    Default

    2012 lml can't get rid of p2033 dtc after delete. can anyone help?

  2. #12
    Junior Member
    Join Date
    Apr 2017
    Posts
    12

    Default

    Go into the DTC list and disable it. That's all you should have to do.

  3. #13
    Junior Member
    Join Date
    Apr 2017
    Posts
    41

    Default

    Where is the dtc list in an LML tune?

  4. #14
    Junior Member
    Join Date
    Apr 2017
    Posts
    12

    Default

    go into engine diagnostics. then click on diagnoigstic DTCs. then DTC activation table.

  5. #15
    Junior Member
    Join Date
    Apr 2017
    Posts
    12

    Default

    you have to be in v7.5 tune. BTW

  6. #16
    Junior Member
    Join Date
    Apr 2017
    Posts
    41

    Default

    I don't get a DTC table in an LML tune. It's there in an LMM tune but not an LML. In vehicle options I've turned everything off except the air heater and still get the P2033 code and cel

  7. #17
    Junior Member
    Join Date
    Apr 2017
    Posts
    12

    Default

    Thats odd. Are you sure you have the right tune? I ran into something similar. I flashed a 2012 with a 2011 tune. It threw random codes

Page 2 of 2 FirstFirst 12

Similar Threads

  1. LML will not open
    By panzerwillie in forum Duramax 2011+ LML / LGH
    Replies: 4
    Last Post: September 4th, 2014, 01:05 PM
  2. 6.7L Throttle valve delete and egr delete
    By Killerram2500 in forum Cummins 6.7L
    Replies: 4
    Last Post: November 20th, 2012, 02:41 PM
  3. Lml / lgh
    By shay in forum Duramax 2011+ LML / LGH
    Replies: 2
    Last Post: March 10th, 2011, 12:41 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •