Some time back I was able to use V4 to connect scan & log my VS V6. Now I have a Toyota Hilux 4WD conversion running the GMH VT V6 engine & ECU.
It has no BCM & something has been done to the memcal to allow the ECU to runs things like this.
Now while trying to connect with the EFI V4 to do some scans & hopefully logging, I get the line cannot hear chatter. I did not have this with the VS V6 & my VY V6 when trying to connect.
Wondering if it is because this set up runs with out the BCM ?

Cheers

Deek