View Poll Results: What year model do you most want to tune with EFILive's FlashScan Tuning Tool?

Voters
58. You may not vote on this poll
  • 97/98 Corvette

    3 5.17%
  • 98 Camaro

    11 18.97%
  • 99 - 03 Any

    30 51.72%
  • 04 Any

    6 10.34%
  • All

    8 13.79%
  • Don't care

    0 0%
Page 3 of 3 FirstFirst 123
Results 21 to 29 of 29

Thread: What year model?

  1. #21
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,501

    Default

    The first post in this thread is somewhat misleading. I have updated it to reflect our intentions to support the 98.

    Regards
    Paul

  2. #22
    Lifetime Member GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,148

    Default

    Quote Originally Posted by jsbird98
    If Keith@hptuners can figure it out and bring it to market you guys should be able too. J
    It has been covered elsewhere how that all happened, go educate yourself before getting stuck into us.

  3. #23
    New Member
    Join Date
    Jan 2004
    Posts
    6

    Default

    Quote Originally Posted by emarkay

    Aww jeez, who let the whiners in??? :(

    Come on, haven't you been reading the progress here regarding 1998's - if so, your comment is unwarranted (it takes A LOT to get me to "dis" a potential customer) and if not, please take a bit of time investigating things before freaking out....

    As for the wait, we ALL have to wait till it's done.

    As for the LT1/LS1 issue, one reason it's NOT simple is because it IS the first [2] year[s] of the LS1 - it's a typical GM "massage it on the fly, hope it lasts the warranty, then forget about it". Don't blame us! It's a completely different bird in that PCM, and it's an "orphan". We don't have the resources, financially or technically to concentrate on a percent of the market one can count on one's fingers, in relation to the BIG picture. Remeber, while there are some vocal 1998 owners on here, the (silent) majority is 1999 to 2005 and beyond ...

    We WILLsupport the 1997/1998's, only NOT from the "World Headquarters" in New Zealand. It will be basically "open sourced" and will be available at the introduction, when the rest of the product line is released.

    If you want to buy a competetor's product because you think it's a valid alternative and it meets your needs, and you choose not to wait for us, there is nothing we can do.

    MRK
    Whiner, I was just voicing an opinion, from what I read on the first post of this topic it really looked like the 98 had a chance of not being supported. I was pleading the case for me and other 98 owners. If it makes me a "whiner" so be it, I just like getting fair treatment. But I am a not a "potential customer", kid. I AM A PAYING CURRENT CUSTOMER of EFILIVE and enjoy the ease of use and quality of their scanner, so please treat me with more respect. I didn't disrespect efilive at all PERIOD, sorry if you read it that way....sometimes posts are misleading....

    as for reading the "progress" I read the weekly updates and haven't really seen anything other than a post from Black LS1 T/A saying the 98's would be supported by a 3rd party arrangement....and you replied, but there was nothing Set in Stone about supporting the 98 in your reply. Maybe I did miss the post where you guys said the 97/98 would be supported, as I don't read every post here in the flashscan section, and I do try to keep up with the weekly updates, but might miss some here and there. I am not perfect.

    Big Picture?If you are looking at the big picture that emcompasses all right?

    As for holding off on purchasing another product, I stated I have waited just as long as you for the flashscan to be made available to "us" but felt like us 98 owners would be getting the shaft for waiting this long if we weren't supported, right? It would suck if you were told to wait a long time for something awesome to only find out that it wouldn't work for what you have, right? I want the best product period and that would be flashscan. And you are a mod for this board?

    Quote Originally Posted by Blacky
    The first post in this thread is somewhat misleading. I have updated it to reflect our intentions to support the 98.

    Regards
    Paul
    Thanks Paul, Sorry if it came out like I was knocking your product, I sincerely didn't see any other information posted here on the flashscan updates about the 98 being supported and I was going off the info provided on the first post completely.

    Quote Originally Posted by GMPX
    It has been covered elsewhere how that all happened, go educate yourself before getting stuck into us.
    ??I didn't get stuck into anybody. As a customer it really doesn't concern me and I don't really care what happened between you, whoever and hptuners. Point was they made it to market for the 98's. I just care that I flashscan works for us all, so go take your hate somewhere else.

    Man you guys really need a change in moderation if this is how you treat your members when they voice their opinion. The only fair response, was from blacky and I appreciate that. He saw that I was a mislead by the first post and corrected it. Thank you for handling it in a professional manner.
    A reminder to the other mods 99% of your members, are users of EFILIVE and are paying/supporting customers.
    98 Formula A4

  4. #24
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,501

    Default

    Unfortunately your post did appear to be critical of EFILive for not supporting the 98's. (I understand why).

    There is a lot of information that moderators get to read and deal with that the general forum public do not. Some of that information influences the way posts are viewed.

    As for the "getting stuck into us" comment by GMPX...
    Basically your assumption that HPTuners "figured it out" may not be entirely correct.

    Regards
    Paul

  5. #25
    Lifetime Member emarkay's Avatar
    Join Date
    Apr 2003
    Posts
    481

    Default

    OK - my apology is presented - and BTW, I betcha I'm older than ya, 'tis been a long time since I have called a kid.

    Now since the prosecution has presented a clear case of a conduct unbecomming of a moderator, the defense would like a moment of introspective clarification, your honour...

    It's easy for me to get worked up when emotional words like ridiculous, shafted, hassle, and HPTuners are thrown out. I do, however, understand that it may have seemed as if the aforementioned third party:

    http://www.efilive.com/forum/viewtop...ht=third+party
    http://www.efilive.com/forum/viewtop...ht=third+party
    http://www.efilive.com/forum/viewtop...t=454&start=30

    information (regarding the 1997-1998s) was a bit more clear in definition.

    However, it is clear that you are a busy person who (rightfully so) does not have time to read every post. My bad presumption that everyone here does. My also bad in failing to seperate the "black" world from the "open" world, (or in this case, the "Blacky" world) as I am involved at a much deeper level than I am willing or able to discuss in public, and therefore may have thought the 1997-1998 issue was "set in stone" - at least from EFILive's perspective, and therefore mine.

    However one must also understand that even Blacky reserves the right to change things as he is wont to do, due to many different reasons, and while there is nothing as sure as death, taxes, and vaporware, EFILive will do it's best to listen to it's customers and offer SOME measure of satisfaction to the best of their abilities..

    In conclusion, let it be stated for the record, that moderators are welcome to use emotion when presented with emotion - I felt the measured response was appropriate...

    Hear ye, Hear ye! The good people of the jury have spoken, and I have been declared "a bit harsh", and therefore will provide my pennance, again, with my apology, if you took offense.

    Case Closed!

    MRK

  6. #26
    New Member
    Join Date
    Jul 2004
    Posts
    1

    Default

    Quote Originally Posted by Blacky
    Basically your assumption that HPTuners "figured it out" may not be entirely correct.
    Regards
    Paul

    Care to explain your comments?


    zippthewonderslug

  7. #27
    Junior Member
    Join Date
    Sep 2003
    Posts
    13

    Default

    My need is for the 02 Vette, but sometime next year I will have a C6 and would like support for that at that time.

    By the way, is there a way to vote on this poll? If so, I'm missing how to do it....help.

  8. #28
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,501

    Default

    Quote Originally Posted by zippthewonderslug
    Quote Originally Posted by Blacky
    Basically your assumption that HPTuners "figured it out" may not be entirely correct.
    Regards
    Paul
    Care to explain your comments?
    zippthewonderslug
    No, this forum is not an appropriate place for such a discussion.
    As GMPX said: "It has been covered elsewhere how that all happened."

    Regards
    Paul

  9. #29
    EFILive Developer Site Admin Blacky's Avatar
    Join Date
    Mar 2003
    Posts
    9,501

    Default

    Quote Originally Posted by warpster
    By the way, is there a way to vote on this poll? If so, I'm missing how to do it....help.
    If you can see the poll results, then you have already voted. If you have not voted then you should see an option to vote instead.

    This poll has been around for a while now, maybe you voted a *long* time ago.

    Regards
    Paul

Page 3 of 3 FirstFirst 123

Similar Threads

  1. A40 TCM PCB Pic/CPU model
    By Cougar281 in forum Lounge
    Replies: 2
    Last Post: March 8th, 2009, 02:48 PM
  2. COS' temperature model
    By redhardsupra in forum Custom Operating Systems
    Replies: 1
    Last Post: October 5th, 2008, 11:13 AM
  3. Different model CAL into a different PCM
    By Turbogixxer in forum General (Petrol, Gas, Ethanol)
    Replies: 3
    Last Post: January 9th, 2007, 05:52 AM
  4. 06 model year?
    By DWS6 in forum General (Petrol, Gas, Ethanol)
    Replies: 6
    Last Post: September 3rd, 2006, 08:34 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •