Results 1 to 9 of 9

Thread: Script exited with code $0101: No data received

  1. #1
    Junior Member
    Join Date
    Dec 2007
    Posts
    17

    Default Script exited with code $0101: No data received

    Truck was giving me all sorts of odd codes upon initial flash. Finally got it to take a DSP5 file then went to make changes via a Cal flash same issue wouldn't take so I went to start it and no start. ECM is working I can hear it power on/off. I am also able to clear codes. What can I try...

  2. #2
    Lifetime Member GMC-2002-Dmax's Avatar
    Join Date
    Dec 2005
    Posts
    1,280

    Default

    Its probably a brick, that is the bad code.

    Paul or Ross would probably agree.

    If you cannot pull a VIN# and ECM SN# and get no response using the get calibration info then its a brick most likely
    www.mscservices.net


    Tuner of many, many Duramax and Cummins Diesels.


  3. #3
    Junior Member
    Join Date
    Dec 2007
    Posts
    17

    Default

    Can it brick by doing a Cal flash?

  4. #4
    Lifetime Member GMC-2002-Dmax's Avatar
    Join Date
    Dec 2005
    Posts
    1,280

    Default

    Try to read it out, EFI-Live software will alert you if the Cal is bad, try to read it and if the ECM won't boot to read then that is another bad sign.

    Usually a CAL Flash won't Brick it, but a Cal flash on an LB7 just alters the base tune and not the DSP5 tunes
    www.mscservices.net


    Tuner of many, many Duramax and Cummins Diesels.


  5. #5
    Junior Member
    Join Date
    Dec 2007
    Posts
    17

    Default

    It won't read the ECM.

  6. #6
    Lifetime Member GMC-2002-Dmax's Avatar
    Join Date
    Dec 2005
    Posts
    1,280

    Default

    Its most likely bricked, only way to fix it if you cannot pull any codes, or get any info is a Flash Chip replacement.

    I lost count how many ecms I have gotten back as cores that were bricked over the last 9 years.

    I have not bricked one yet, but plenty of times they brick themselves.
    www.mscservices.net


    Tuner of many, many Duramax and Cummins Diesels.


  7. #7
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,109

    Default

    Would you mind Emailing your tune to support@efilive.com with a link to this thread.

    Thanks,
    Ross


  8. #8
    Junior Member
    Join Date
    Dec 2007
    Posts
    17

    Default

    Quote Originally Posted by GMPX View Post
    Would you mind Emailing your tune to support@efilive.com with a link to this thread.

    Thanks,
    Ross
    I will do it in about 45 minutes

  9. #9
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    13,109

    Default

    It is 7pm in NZ....don't rush


Similar Threads

  1. Replies: 4
    Last Post: September 3rd, 2013, 08:18 AM
  2. Autocal Read Error $0101 No data received
    By firehawk in forum AutoCal
    Replies: 2
    Last Post: April 14th, 2013, 10:36 PM
  3. Replies: 8
    Last Post: April 9th, 2013, 01:00 PM
  4. Replies: 2
    Last Post: December 31st, 2012, 11:11 PM
  5. Replies: 7
    Last Post: December 31st, 2012, 11:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •