Results 1 to 9 of 9

Thread: Script exited with code $0101: No data received

  1. #1
    Junior Member
    Join Date
    Dec 2007
    Posts
    17

    Default Script exited with code $0101: No data received

    Truck was giving me all sorts of odd codes upon initial flash. Finally got it to take a DSP5 file then went to make changes via a Cal flash same issue wouldn't take so I went to start it and no start. ECM is working I can hear it power on/off. I am also able to clear codes. What can I try...

  2. #2
    Lifetime Member GMC-2002-Dmax's Avatar
    Join Date
    Dec 2005
    Posts
    1,259

    Default

    Its probably a brick, that is the bad code.

    Paul or Ross would probably agree.

    If you cannot pull a VIN# and ECM SN# and get no response using the get calibration info then its a brick most likely
    www.ridgerunnerdieselperformance.com

    tony@ridgerunnerdieselperformance.com

    Tuner of many, many Duramax and Cummins Diesels.


  3. #3
    Junior Member
    Join Date
    Dec 2007
    Posts
    17

    Default

    Can it brick by doing a Cal flash?

  4. #4
    Lifetime Member GMC-2002-Dmax's Avatar
    Join Date
    Dec 2005
    Posts
    1,259

    Default

    Try to read it out, EFI-Live software will alert you if the Cal is bad, try to read it and if the ECM won't boot to read then that is another bad sign.

    Usually a CAL Flash won't Brick it, but a Cal flash on an LB7 just alters the base tune and not the DSP5 tunes
    www.ridgerunnerdieselperformance.com

    tony@ridgerunnerdieselperformance.com

    Tuner of many, many Duramax and Cummins Diesels.


  5. #5
    Junior Member
    Join Date
    Dec 2007
    Posts
    17

    Default

    It won't read the ECM.

  6. #6
    Lifetime Member GMC-2002-Dmax's Avatar
    Join Date
    Dec 2005
    Posts
    1,259

    Default

    Its most likely bricked, only way to fix it if you cannot pull any codes, or get any info is a Flash Chip replacement.

    I lost count how many ecms I have gotten back as cores that were bricked over the last 9 years.

    I have not bricked one yet, but plenty of times they brick themselves.
    www.ridgerunnerdieselperformance.com

    tony@ridgerunnerdieselperformance.com

    Tuner of many, many Duramax and Cummins Diesels.


  7. #7
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,766

    Default

    Would you mind Emailing your tune to support@efilive.com with a link to this thread.

    Thanks,
    Ross
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


  8. #8
    Junior Member
    Join Date
    Dec 2007
    Posts
    17

    Default

    Quote Originally Posted by GMPX View Post
    Would you mind Emailing your tune to support@efilive.com with a link to this thread.

    Thanks,
    Ross
    I will do it in about 45 minutes

  9. #9
    Forum tyhee Site Admin GMPX's Avatar
    Join Date
    Apr 2003
    Posts
    12,766

    Default

    It is 7pm in NZ....don't rush
    Need official EFILive help, please go here.
    For tuning support please post your questions on this forum (or other auto forums).
    Sorry if I don't respond to your PM, don't take it personal.


Similar Threads

  1. Replies: 4
    Last Post: September 3rd, 2013, 07:18 AM
  2. Autocal Read Error $0101 No data received
    By firehawk in forum AutoCal
    Replies: 2
    Last Post: April 14th, 2013, 09:36 PM
  3. Replies: 8
    Last Post: April 9th, 2013, 12:00 PM
  4. Replies: 2
    Last Post: December 31st, 2012, 10:11 PM
  5. Replies: 7
    Last Post: December 31st, 2012, 10:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •